Protective cover for the multiple plug for Q series Gen2. If no LED module is connected to the multi-plug, this cover protects against contamination in the grow box.

• connects the lamp with a distribution block
• fits for Q-Series Gen2 and EVO lamps
• space-saving 90 ° angle

To connect several SANlight LEDs to a distribution block, you need the right extension cable. This cable is equipped with a 90 ° angle plug and thus saves a lot of space when installed.

• With angled appliance plug
• saves space during installation
• can be used for Q and EVO series

Especially with smaller grow boxes, it is often the case that a straight connection cable already touches the tent wall on the lamp side. The grow lamp may then not be able to be hung in the perfect position for homogeneous illumination. With the SANlight power cable with a 90° angle on the side of the unit, you save a lot of space and can avoid this problem. The angled power cable works for the new EVO series as well as for the lamps of the proven Q Gen2 series.

• strong PPF of 520 µmol/s
• 2 lamps are ideal for areas of 100 x 100 cm
• Dimmable and very flexible in use
• Quality LEDs with secondary optics

With the new EVO series, SANlight is once again setting new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• Top efficiency of >3 µmol/J
• ideal for areas of 60 x 60 cm
• Quality LEDs with secondary optics
• dimmable and very flexible in use

With the new EVO series, SANlight is once again setting new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• Quality LEDs from Osram and Seoul Semiconductor
• ideal for areas of 80 x 80 cm
• Top efficiency of >3 µmol/J
• dimmable and very flexible to use

With the new EVO series, SANlight once again sets new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• We recommend two EVO 4-100 for 100 x 100 cm in Pro setup
• 696 µmol/s at 250 watts - extreme light output
• Top efficiency of >3 µmol/J
• Dimmable, also via Bluetooth

With the new EVO series, SANlight once again sets new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• we recommend two EVO 4-120 for grow boxes with 120 x 120 cm
• Top efficiency of >3 µmol/J
• 696 µmol/s at 250 watts - extreme light output
• Via Bluetooth or magnetic dimmer dimmable

With the new EVO series, SANlight is once again setting new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• ideal for areas of 80 x 80 cm in the Pro setup
• Top efficiency of >3 µmol/y
• new, completely revised series
• Optional dimming, contactless and via Bluetooth

With the new EVO series, SANlight is once again setting new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• designed for experienced growers - 870µmol/s at 320W
• for use in open grow rooms
• we recommend two EVO 5-100 for 120 x 120 cm in Pro setup
• dimmable via Bluetooth or magnetic dimmer

The EVO 5 models of the new EVO series are primarily intended for professionals and very experienced growers. Due to the massive light output, the use in grow boxes is not recommended by the manufacturer; this high-performance LED is better suited for open cultivation areas. As before, SANlight once again sets new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the successful lamp concept has been further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lamps and are currently unrivalled on the market.

• For open spaces and high rooms
• for pro-grows - performs 870µmol/s at only 320W
• Two EVO 5-120 are ideal for 120 x 120 cm in Pro setup
• Quality LEDs from Osram and Seoul Semiconductor

The EVO 5 models of the new EVO series are primarily intended for professionals and very experienced growers. Due to the massive light output, the use in grow boxes is not recommended by the manufacturer, this high-power LED is better suited for open growing areas. As before, SANlight once again sets new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the successful lamp concept has been further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• Saturated light output of 870µmol/s
• optimal homogeneity and luminous efficacy due to secondary optics
• Two EVO 5-150 are perfect for 150 x 150 cm grow boxes
• Quality LEDs from Osram and Seoul Semiconductor

The models of the new EVO 5 series have been designed for experienced growers with demands for extreme light output. As with previous models, SANlight is once again setting new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lamps and are currently unrivalled on the market.

• dim your lamps via smartphone app
• stepless dimming, up to 3200 lamps
• stealth mode possible

Powerful lamps such as the EVO series from SANlight should be dimmed when your plants are growing or when propagating cuttings. Since you also save electricity when dimming, the use of dimmers makes twofold sense.

Extension cable for connecting LED grow lamps of the new Sanlight Q-Series Generation 2. The cable can be used to connect several LED modules of the Q-Series Gen2 in series (daisy-chaining).

Extension cable for connecting LED grow lamps of the new Sanlight Q-Series Generation 2. The cable can be used to connect several LED modules of the Q-Series Gen2 in series (daisy-chaining).

• broadband, with Far Red
• PPF: 25 µmol/s
• multilayer suitable
• for breeding of cuttings
• Interlight

The grow lights of the SANlight FLEX II series are suitable for a wide range of applications. Whether as a multilayer, for rooting cuttings, as an interlight or as lighting for indoor plants - the SANlight FLEX II offers your plants a balanced light spectrum with low power consumption.

• 2 lamps on 1 power supply
• length approx. 84 cm
• 2x female / 1x male
• WDC19 / WDC19

In order to connect several SANlight FLEX II to one power supply unit, you need a Y-distributor. With the 2-way distributor you can, for example, operate two FLEX II-25s on one SGA60 or two FLEX II-10s on one GST25. The plugs have an IP65 protection class.

• broadband, with Far Red
• PPF: 50 µmol/s
• multilayer suitable
• for breeding of cuttings
• Interlight

The grow lights of the SANlight FLEX II series are suitable for a wide range of applications. Whether as a multilayer, for rooting cuttings, as an interlight or as lighting for indoor plants - the SANlight FLEX II offers your plants a balanced light spectrum with low power consumption.

• broadband, with Far Red
• PPF: 62,5 µmol/s
• multilayer suitable
• for breeding of cuttings
• Interlight

The grow lights of the SANlight FLEX II series are suitable for a wide range of applications. Whether as a multilayer, for rooting cuttings, as an interlight or as lighting for indoor plants - the SANlight FLEX II offers your plants a balanced light spectrum with low power consumption.

• 4 lamps on 1 power supply
• 4x female / 1x male
• WDC19 / WDC19

In order to connect several SANlight FLEX II to one power supply unit, you need a Y-distributor. With the 4-way distributor you can, for example, operate 4 FLEX II-10s on one SGA60. The plugs have an IP65 protection class.

• WDC19 / WDC19
• male / female
• IP65

If you want to hang one of your SANlight Flex II LED lamps a little further away from the power supply unit, you can use this extension cable with a length of one metre. It has WDC19 plugs on both sides, 1x male and 1x female. The plugs comply with protection class IP65.

• 25 watts of power
• for 1x FLEX II-20/25
• for 2x FLEX II-10

To supply your SANlight FLEX II with power, you need a suitable power supply unit. The GST25 has a power rating of 25 watts and can supply either one FLEX II-20 / II-25 or two FLEX II-10s. To use one power supply unit for several lamps, you will need an extra Y-distributor cable.

• 60 watts of power
• for up to 2x FLEX II-25
• for up to 3x FLEX II-20
• for up to 6x FLEX II-10

To supply your SANlight FLEX II with power, you need a suitable power supply unit. The SGA60 has a power rating of 60 watts and can supply either three FLEX II-20s, two FLEX II-25s or six FLEX II-10s. To use one power supply unit for several lamps, you also need a Y-distributor cable.

• dimming via GrowBase & GrowBase Pro
• approx. 2 metres long
• Wieland connector to RJ45

If you want to control an EVO series LED grow lamp with a GrowBase or GrowBase Pro from GrowControl, you need this adapter cable. It has the waterproof Wieland RST20i3 plug for EVO lamps at one end and an RJ45 plug for GrowControl devices at the other. The cable is about 2 metres long and ready-made. With several adapters and corresponding RJ45 Y-pieces, you can control several SANlight EVO LEDs via one GrowBase.

• switch on more lights per fuse
• Limited to 16 A

Although LED luminaires work very effectively and consume little current in relation to MH/NDL, their inrush currents are usually quite high. Even if these currents only occur for a very short time, it is often enough to trigger the circuit breaker. The SANlight inrush current limiter reduces the current to a maximum of 16 amperes. For example, you can switch on up to 16 EVO 3, 12 EVO 4 or 10 EVO 5 simultaneously (with a 16-ampere fuse). Without a limiter, the limit is already reached with 4 lamps. Other LED lamps with Wieland RST20i3 plugs can also be operated with this inrush current limiter.

• designed for areas with 1m depth
• very high output of 520 µmol/s
• in set with mains connection cable and magnetic dimmer

The SANlight EVO 3-100 was developed for cultivation areas with a depth of 1 meter. For grow boxes with a footprint of 1 sqm, two EVO 3-100 are ideal. With their slim design and around 82 cm length, they fit well to the side next to an activated charcoal filter and enable very even illumination thanks to the tilt function. Of course, you can also work with just one lamp, e.g. when growing cuttings or keeping mother plants. Since one EVO 3-100 already provides a rich 520 µmol/s light output, you can easily adjust the light output to the needs of your plants with the included dimmer. With a dimmed lamp, you even save electricity costs, as the efficiency of the LEDs is fully maintained. The set includes a matching mains connection cable with 90° angled plug.

• ideal for areas of 60 x 60 cm
• Top output of 520 µmol/s with only 190 W
• in set with magnetic dimmer and mains connection cable

If you want to illuminate a grow box with an area of 60 x 60 cm, this set with an EVO 3-60 from SANlight is just right for you. The matching connection cable with a practical angled plug and a waterproof magnetic dimmer are included. After all, this high-tech lamp delivers 520µmol/s, so you can adjust the amount of light to the respective development phases of your plants. When dimmed, you even save quite a bit on electricity costs, as the efficiency of the LEDs is fully maintained.

• ideal for surfaces of 80 x 80 cm
• in set with magnetic dimmer and mains connection cable
• Quality LEDs with secondary optics

This set offers you not only a modern SANlight EVO 3-80 but also the matching connection cable (with a space-saving angled plug) and a practical magnetic dimmer. Since this grow lamp delivers a whopping 520 µmol/s and your young plants need less light during the growth phase than during flowering, the use of a dimmer really makes sense. Dimming even saves you some electricity costs, as the efficiency of the LEDs is fully maintained.

• In the Pro-Set-up two EVO 4-100 for boxes with 100 x 100 cm
• 696 µmol/s with only 250 Watt - light output full!
• in set with mains connection cable and magnetic dimmer

For a pro set-up, SANlight recommends the use of two EVO 4-100 for an area of 100 x 100 cm. With only one lamp, you can still illuminate cuttings and mother plants perfectly. If you choose the professional set-up, however, you should be familiar with very high light quantities for indoor growing. 2x 696 is already a lot of light - if necessary, the use of additional CO2 can make sense here, for example with a CO2 bag. The set includes a practical magnetic dimmer for infinitely variable adjustment of the light output to the early development phases of your plants and a matching cable with a 90° angled plug for connecting the lamp to the mains supply.

• Two EVO 4-120 are ideal for areas of 120 x 120 cm
• in set with mains connection cable and magnetic dimmer
• Only 250 watts power consumption with 696 µmol/s light output

If you want to illuminate an area of 120 x 120 cm for a high-yield grow, you should choose two EVO 4-120. For cuttings and young plants, you will have enough light with just one lamp. If you choose a set-up with two of these extremely powerful LEDs, you can provide your protégés with a total of 1392 µmol/s light output. That's a lot of light on 1.44 square metres - but your plants can still process it without additional CO2 and produce rich harvests. Nevertheless, you should reduce the amount of light for cuttings and young plants - with the waterproof magnetic dimmer included in the set, this can even be done continuously. A suitable cable with a 90° angled plug is included for connecting the lamp to the mains.

• in Pro-Set-up suitable for grow boxes with 80 x 80 cm
• Efficiency >3 µmol/J
• High light output: 696 µmol/s at only 250 watts
• in set with mains connection cable and magnetic dimmer

You have plenty of experience with indoor growing and already know your way around high light quantities per square metre? Then the EVO 4-80 for areas of 0.64 sqm is a good choice for you! In the professional set-up, however, this power LED must be dimmed for young plants and in the growth phase due to the very high output of 696 µmol/s! Conveniently, a waterproof dimmer is already included in the set, which allows you to continuously adjust the output to the needs of your protégés. For connection to the mains, a practical mains cable with angled plug is included in the set.

• Set including magnetic dimmer and mains cable (90° plug)
• Powerful 870 µmol/s with only 320 Watt power consumption
• Professional set-up for areas with 100 x 100 cm

For growers experienced in dealing with large amounts of light, the lamps of the EVO 5 series are particularly suitable. The extreme light quantity of 870 µmol/s is better suited for open growing areas than for grow boxes and during the vegetative phase (and even more so for young plants and cuttings), this high-power LED should definitely be reduced in its output. With the magnetic dimmer included in the set, you can continuously adjust the amount of light to the respective development phase of your plants. Since the efficiency of the LEDs is maintained even when dimmed, you save electricity costs by dimming and extend the life of your EVO 5-100. And to ensure that your new lamp is safely connected to the mains, a suitable mains connection cable with a 90° angle plug is included in the set.

• High-end LEDs - perform 870 µmol/s at only 320 watts power consumption
• Set includes mains cable (90° plug) and magnetic dimmer
• Professional set-up with two EVO 5-120 for areas of 120 x 120 cm

SANlight EVO 5-120 is designed for cultivation areas with a depth of 1.2 meters and is the ideal choice for high rooms or open cultivation areas. The models of the EVO 5 series are intended for real pro-grower with experience in handling maximum light quantities and CO2 supplementation if necessary. For effective and even illumination of 2.44 sqm areas, SANlight recommends two EVO 5-120. If you want to use this pro set-up in a grow box, all components - especially the exhaust system - should be perfectly matched. A total of 1540 µmol/s (with two EVO 5) already requires the use of additional CO2 so that the plants can process this amount of light. For the necessary reduction of the light quantity in the growth phase, you can use the contactless magnetic dimmer included in the set. It is 100 % protected against humidity and corrosion and works continuously. The set also includes a matching mains cable with 90° plug.

• Set including magnetic dimmer and mains cable with 90° plug
• very high PPF of 870 µmol/s
• For growing areas with 150cm depth

SANlight EVO 5-150 is designed for cultivation areas with a depth of 1.5 meters and is the ideal choice for high rooms or open cultivation areas. To properly illuminate large growing areas or grow boxes with 2.25 sqm for your grow, you should install two EVO 5-150. With this area you can still manage without additional CO2, but you should still use a powerful exhaust system. Of course, these high-power LEDs must be dimmed for young plants and also during the growth phase. The set includes a practical magnetic dimmer, with which you can continuously adjust the light output to the needs of your plants. As the efficiency of the LEDs is completely maintained, you save a lot of electricity. A suitable cable with 90° plug for the 230 V connection is also included in the set.

• perfect for grow boxes with 100 x 100 cm
• with connection cables, H-distributor and accessories
• Superior class LED lamps

In order to effectively illuminate a grow box with one square metre of cultivation area, SANlight recommends the use of two EVO 3-100. In addition to the two LED lamps, this set also includes the necessary cables and an H-distributor. Also included are 2 GrowPRO ratchet sets for uncomplicated suspension and a mechanical timer from Legrand. So in the set YOU have the right cables and useful accessories included.

• ideal for 2 surfaces of 60 x 60 cm
• 190 Watt - 520 µmol/s per lamp
• contactless dimmable, also via Bluetooth
• LEDs from OSRAM and Seoul Semiconductor

In addition to two high-performance LED lamps from SANlight, the set includes everything you need in terms of cables and distributors to connect both EVO 3-60 lamps to each other and to the mains. A single Evo 3-60 has an output of 520 µmol/s and is ideal for an area of 60 x 60 cm. This means you can easily illuminate areas or boxes of around 60 x 120 cm cleanly for your indoor grow. In addition to the cables and H-distributor, the set also includes a mechanical Omnirex timer from Legrand and two infinitely adjustable ratchet sets from GrowPRO for clever suspension.

• perfectly suitable for 2 surfaces of 80 x 80 cm
• 2x 520 µmol/s - light output full
• Set with H-distributor and cables

If you want to perfectly illuminate two grow boxes with 80 x 80 cm or, for example, an open growing area of 80 x 160 cm, this set is just right for you. Besides the two EVO 3-80 by SANlight, it contains the necessary mains and extension cables, an H-distributor as well as two cable ratchet sets by GrowPRO and a timer by Legrand. Each of your new EVOs has an output of 520 µmol/s, with a power consumption of only 190 watts - a value that is second to none! So you can look forward to strong growing plants and rich harvests in your future indoor grows.

During the wide-ranging series of experiments with fast-growing and light-hungry plants, SANlight identified the perfect broadband light spectrum with just the right ratio of Far Red to Red for photo-morphogenesis. The emission wavelength here ranges from 400 - 780 nm, with an extremely high efficiency of over 3 µmol/J! All this allows you to increase the quantity and quality of your indoor grow yields. Each individual LED of the EVO 3-80 is equipped with secondary optics, which not only protect the chip from dirt and oxidation, but also enable extremely homogeneous illumination due to their light-directing properties. In contrast to unprotected LEDs, these optics are easy to clean and thus guarantee flawless operation with high light output for a long time.

• Complete set with connection cables, distributor and accessories
• Pro set-up for areas of 100 x 100 cm
• extreme light output of 2 x 696 µmol/s

If you already have a lot of experience with the use of extreme amounts of light and can use additional CO2 in the flowering phase if necessary, two EVO 4-100 per square metre of cultivation area offer you the opportunity to push the performance of your plants to the limits. In the growth phase, you should definitely use dimmers with this set-up. The necessary connection cables and an H-distributor are already included in the set, plus a mechanical timer from Legrand and 2 GrowPRO ratchet sets for the suspension.

• Ideal for mounting areas of 120 x 120 cm
• Necessary H-distributor and connection cable included
• Top efficiency of >3 µmol/J
• with further accessories

Growboxes with a cultivation area of 1.44 sqm can be illuminated with two EVO 4-120 with high lighting intensity and very evenly. Even though no additional CO2 is required with this setup, you should get dimmers for the vegetative phase. The high light intensity of these top LEDs is simply too much for young plants and should only be used to the full when they flower. In addition to the H-distributor and cables, the set also includes a mechanical timer from Legrand and two GrowPRO ratchet sets for uncomplicated installation.

• massive light output of 2 x 696 µmol/s
• Pro set-up for two 80 x 80 cm surfaces
• Quality LEDs with secondary optics

For growers with sufficient experience with high light levels, two EVO 4-80s offer the possibility to get the maximum growth out of their plants in two grow boxes of 80 x 80 cm or a growing area of approximately 80 x 160 cm. With an output of 696 µmol/s, however, you should definitely use a dimmer for young plants and also during the growth phase in order not to damage the plants. Connection cables for the lamps, an H-distributor and an angled mains cable are already included in the set. In addition, there is a mechanical timer from Legrand and two GrowPRO ratchet sets for the suspension.

• Complete set with connection cables, H-distributor and accessories
• 870µmol/s at 320W (per lamp) thanks to high-power LEDs
• in professional setup for areas of 120 x 120 cm
• contactless dimmable, also via Bluetooth

The lamps of the EVO 5 series are particularly suitable for open areas. SANlight recommends their use in grow boxes only to a limited extent due to the massive light output and only when using strong ventilation systems and corresponding experience. Two EVO 5-100 for 1.44 sqm already bring a lot of µmol/s of output even on free areas and you should be familiar with high amounts of light so that your plants can also use them and you get rich harvests. Here, the addition of CO2 may be necessary and you should use dimmers in the vegetative phase. The set already includes the necessary connection cables and an H-distributor. An Omnirex timer and two GrowPRO ratchet sets are also included, so you have everything on the lighting side for a quick start.

• ideal for open areas of 1.2 x 1.2 m
• 2x 870µmol/s guarantee a pro setup
• Set complete with cables, H-distributor and accessories
• Quality LEDs from Seoul Semiconductor and Osram

In addition to two EVO 5-120s from SANlight, this set comes with the necessary connection cables and an H-distributor for connecting the second lamp. Two practical GrowPRO-ratchet sets for suspension and a Legrand-timer are also included. With the top LEDs of the EVO 5 series, you will soon have lamps with powerful output and all the advantages of modern LED grow lamps in your grow room. As an experienced grower, nothing stands in the way of a professional set-up for your indoor grow and powerful harvests.

• Secondary optics for optimal light output and homogeneity
• ideal for large growboxes mi 150 x 150 cm
• Cables, H-distributor and other accessories included
• Pro EVO 5-150 870µmol/s light output at only 320 watts

If you are the lucky owner of a very spacious grow box for your indoor grow, you can reach for this practical and convenient set instead of the individual components. Mains cable, H-distributor, the cables for connecting the lamps, an Omnirex timer by Legrand and 2 GrowPRO ratchet sets for easy suspension of the LEDs are included. Since the necessary cables etc. are included in the set, you don't have to search for everything individually.

• Dimmer for EVO 3, EVO4 and EVO 5
• Contactless dimming - no wear
• 100% waterproof

If you want to dim your lamp of the EVO series by SANlight, you need this magnetic dimmer. Thanks to its contactless function, there is no wear on sensitive potentiometers and corrosion due to water and humidity is no longer a danger with this dimmer. SANlight recommends dimmers especially for the extremely powerful EVO 5 models, but the use of a dimmer often makes sense even for the smaller models. In the vegetative phase, the plants do not need as much light as later during flowering, and for very young plants, too much light is even harmful. So this dimmer allows you to have gentle lighting at the beginning of your indoor grow, while still saving electricity, and a high light output towards the end for fat flowers and lush harvests.

• Magnetic dimmer for the SANlight Gen2 modules
• consists of plug and switch
• can be operated in 4 steps
• for precise power control

All SANlight 2nd generation LED grow lamps (Q series) are "ready-to-dimm." With this magnetic dimmer you can operate the LED modules on 4 levels: 100% - 80% - 60% - 40%. The dimmer consists of a plug and switch and plugs in on the front of the LED light. You need one M dimmer for each SANlight Gen2 LED grow lamp.

• H-distribution block for SANlight LEDs Gen2
• For connecting multiple LED modules
• Daisychaining

All new LED grow lamps of the SANlight Q-Series Generation 2 are daisychainable. In this way, multiple modules can be operated on just one power connection. With this H-distribution block, the lamps can be easily connected in series.(see sketch).

• Power connection for SANlight Grow LEDs
• For all models of the EVO-Series and Q-Series Gen2
• Length 2.1 metres

• not suitable for FLEX II
• Power supply for SANlight FLEX
• for up to 2x Flex 10 / 1x Flex 20
• 25 Watt / 48 Volt
• with EU plug

The SANlight power adapter GST25 supplies the SANlight Flex LEDs Flex 10 and Flex 20 with power.

• not suitable for FLEX II
• Power supply for SANlight FLEX
• for up to 6x Fex 10 / 3x Flex 20
• 60 Watt / 48 Volt
• with EU plug

The SANlight power adapter SGA60 supplies the SANlight Flex LEDs Flex 10 and Flex 20 with power.

• Control up to 3200 lamps
• dim individually or in groups
• IP 65 protected
• Stealth mode possible

To enable you to dim your SANlight Q-Series Gen2 LEDs in a convenient and modern way, SANlight has developed a new Bluetooth dimmer that gives you extremely convenient control of your lamps via smartphone or tablet.

• LED Grow lamp of the next generation
• Fully cabled and ready for use
• advanced secondary optics for highest efficiency
• passive, noiseless cooling

With the new Generation 2 of their Q-Series, the Austrian company SANlight has further optimized their already outstanding LED plant lighting. SANlight is the first manufacturer to consistently use the 2mm² High Power Chip from Osram in all available models. The result: 15% more light output for the same energy consumption! The experience with SANLight LEDs has been consistently positive. The LED Grow Panels from SANlight generate consistently higher yields at significantly lower operating costs than comparable NDL Grow lights.
Like its predecessors, the second generation of the Q-Series convinces with its maximum efficiency and perfect light control. Without exaggeration, SANlight can be called the technical market leader in the field of highly efficient LED lighting systems for indoor grow. The lamps are developed and produced in Austria and set new standards in light output, reliability and durability.

• state of the art LED Grow lamp with 120 Watt
• maximum yield, light output, highest efficiency
• passive, noiseless cooling
• over 100,000 hours life time possible
• perfect for Mini-Growboxes up to 60 x 60 cm

With the new Generation 2 of their Q-Series, the Austrian company SANlight has further optimised their already outstanding LED plant lighting. SANlight is the first manufacturer to use the 2mm² high-power chip from Osram consistently in all available models. The result: 15% more light output for the same energy consumption! Experience with SANLight LEDs has been consistently positive. The LED Grow Panels from SANlight generate consistently higher yields at significantly lower operating costs than comparable NDL Grow lights.

2x SANlight Q3WL Generation 2
1x SANlight Gen2 Power Cable
1x SANlight Gen2 Extension Cable, 1 Meter
1x SANlight Gen2 Multi Plug for Q-Series
2x GrowPRO Rope Ratchet Set
1x Legrand Omnirex Timer

• The next generation of LED Grow Lights
• maximum yield, light output, highest efficiency
• passive, noiseless cooling
• more than 100,000 hours of working life possible

With the new Generation 2 of its Q series, the Austrian firm SANlight has once again optimised its already outstanding LED plant light system. SANlight is the first manufacturer to use the 2mm² High Power Chip from Osram consistently in all available models. The results: 15% more light output for the same energy consumption rate! The experience with SANlight LEDs is consistently positive. The LED Grow Panels from SANlight generate consistently higher output at considerably lower operating costs as comparable HPS grow lights.

2x SANlight Q4W Generation 2
1x SANlight Gen2 Power Cable
1x SANlight Gen2 Extension Cable, 1 Meter
1x SANlight Gen2 Multi Plug for Q-Series
2x GrowPRO Rope Ratchet Set
1x Legrand Omnirex Timer

• The next generation of LED Grow Lights
• maximum yield, light output, highest efficiency
• passive, noiseless cooling
• more than 100,000 hours of working life possible

With the new Generation 2 of its Q series, the Austrian firm SANlight has once again optimised its already outstanding LED plant light system. SANlight is the first manufacturer to use the 2mm² High Power Chip from Osram consistently in all available models. The results: 15% more light output for the same energy consumption rate! The experience with SANlight LEDs is consistently positive. The LED Grow Panels from SANlight generate consistently higher output at considerably lower operating costs as comparable HPS grow lights.

2x SANlight Q4WL Generation 2
1x SANlight Gen2 Power Cable
1x SANlight Gen2 Extension Cable, 1 Meter
1x SANlight Gen2 Multi Plug for Q-Series
2x GrowPRO Rope Ratchet Set
1x Legrand Omnirex Timer

• The next generation of LED Grow Lights
• maximum yield, light output, highest efficiency
• passive, noiseless cooling
• more than 100,000 hours of working life possible

With the new Generation 2 of its Q series, the Austrian firm SANlight has once again optimised its already outstanding LED plant light system. SANlight is the first manufacturer to use the 2mm² High Power Chip from Osram consistently in all available models. The results: 15% more light output for the same energy consumption rate! The experience with SANlight LEDs is consistently positive. The LED Grow Panels from SANlight generate consistently higher output at considerably lower operating costs as comparable HPS grow lights.

2x SANlight Q5W Generation 2
1x SANlight Gen2 Power Cable
1x SANlight Gen2 Extension Cable, 1 Meter
1x SANlight Gen2 Multi Plug for Q-Series
2x GrowPRO Rope Ratchet Set
1x Legrand Omnirex Timer

• The next generation of LED Grow Lights
• maximum yield, light output, highest efficiency
• passive, noiseless cooling
• more than 100,000 hours of working life possible

With the new Generation 2 of its Q series, the Austrian firm SANlight has once again optimised its already outstanding LED plant light system. SANlight is the first manufacturer to use the 2mm² High Power Chip from Osram consistently in all available models. The results: 15% more light output for the same energy consumption rate! The experience with SANlight LEDs is consistently positive. The LED Grow Panels from SANlight generate consistently higher output at considerably lower operating costs as comparable HPS grow lights.

2x SANlight Q6W Generation 2
1x SANlight Gen2 Power Cable
1x SANlight Gen2 Extension Cable, 1 Meter
1x SANlight Gen2 Multi Plug for Q-Series
2x GrowPRO Rope Ratchet Set
1x Legrand Omnirex Timer

• The next generation of LED Grow Lights
• maximum yield, light output, highest efficiency
• passive, noiseless cooling
• more than 100,000 hours of working life possible

With the new Generation 2 of its Q series, the Austrian firm SANlight has once again optimised its already outstanding LED plant light system. SANlight is the first manufacturer to use the 2mm² High Power Chip from Osram consistently in all available models. The results: 15% more light output for the same energy consumption rate! The experience with SANlight LEDs is consistently positive. The LED Grow Panels from SANlight generate consistently higher output at considerably lower operating costs as comparable HPS grow lights.

• dimming via TrolMaster controller
• cable length approx. 2 metres
• Wieland connector to RJ12

To dim lamps of the SANlight EVO series with a controller from TrolMaster, you should use the SANlight TrolMaster adapter. It has the waterproof Wieland RST20i3 plug for the EVO LEDs at one end and an RJ12 plug for the TrolMaster controller at the other end. All in all, this adapter cable is about 2 metres long and has a high-quality finish. You can control several EVOs simultaneously via one controller using RJ12 Y adapters and other SANlight TrolMaster adapters.