The most powerful LED grow lamp in the SANlight range: EVO 6-150 1.5, 400W
Due to their enormous light output, the lamps in the EVO 6 series are particularly suitable for experienced pro growers. The manufacturer does not recommend using them in grow boxes; these high-performance LEDs are better suited to open cultivation areas. As before, SANlight is once again setting new standards in LED plant lighting with the EVOs in terms of quality, design and performance. The successful lamp concept was further developed in extensive empirical tests in the company's own laboratories and further improved in essential points. The new EVO 3, EVO 4, EVO 5 and EVO 6 models rank in the top class of LED grow lights and are currently unrivalled on the market.
Ideal for grow rooms with open spaces and grow boxes from 150 x 150 cm
If you want to start a grow project in a large grow room with good ventilation and open growing areas or have a sufficiently large grow box, the EVO 6-150 is the perfect choice. However, you should use dimmers, especially in the vegetative phase. If you use this high-performance lamp in a grow box, you will definitely need sufficient experience with the use of extreme amounts of light and the use of dimmers.
Broadband light spectrum and high homogeneity
In the wide-ranging series of tests with fast-growing and light-hungry plants, SANlight determined the ideal broadband light spectrum with exactly the right ratio of Far Red to Red for photomorphogenesis. The emission wavelength ranges from 400 - 780 nm, with an extremely high efficiency of over 3 µmol/J! This enables you to increase the quantity and quality of your indoor grow yields. Each individual LED in the EVO 6-150 is fitted with secondary optics, which not only protect the chip from contamination and oxidation, but also enable extremely homogeneous illumination thanks to their light-directing properties. In contrast to unprotected LEDs, these optics are easy to clean and therefore guarantee flawless operation with a very high light output for a long time.
Quality LEDs, clever mounting options and dimmability
SANlight has also spared nothing when it comes to LED quality. The latest OSRAM High Power LEDs are used for the Red and Far Red LEDs, while chips with the patented WICOP technology from Seoul Semiconductor are used for the white LEDs. These LEDs are particularly robust, highly efficient and have a particularly long service life. SANlight specifies the 90 % light output (LM90) as 90,000 hours - a remarkable value! The tilt function (tilted suspension of the lamp) saves a lot of space at the top. The elongated modules can be mounted on the side next to the ventilation system. By angling the lamp, perfect and homogeneous illumination is still achieved. Of course, you can also dim the lamps in the EVO series. The optionally available dimmers (magnetic or Bluetooth) work without contact and are therefore wear-free and completely protected from water and high humidity. Thanks to the dimming function, you can easily adapt your new EVO 6-150 to all development phases of your plants. As young plants in particular can tolerate much less light than older plants and not as much light is required during growth as during flowering, you can still illuminate your plants from seedling to harvest with the EVO 6. When dimmed, the efficiency is fully maintained and you save a lot on electricity costs.
Scope of delivery:
- 1x SANlight EVO 6-150
Attention: Connection cables and dimmers etc. are not included and can be ordered individually in the shop. You can also use the Q Gen2 series cables for the EVO series.
- Power consumption: 400 watts
- Power factor: > 0.95
- Input voltage: 100 - 240 V
- Length: 1318 mm
- Width: 291 mm
- Height 112 mm
- Photon flux density: 1090 µmol/s
- Efficiency: >3 µmol/J
- Emission wavelength: 400 - 780 nm
- Weight: 7.5 kg
- Protection class: IP65
- max. rel. Humidity: 99%
- LM90: > 90,000 h
There are no reviews yet.