Sanlight M-Dimm EVO-Serie Magnetic Dimmer

SANlight EVO-Series M-Dimm for straightforward magnetic output control

The SANlight EVO-Series M-Dimm Magnetic Dimmer lets you adjust the output of compatible SANlight LED grow lights directly at the fixture. Four fixed power levels make it easy to adapt light intensity to different stages of cultivation. Settings are changed with the supplied magnetic clip, while the dimmer itself receives its power directly from the connected light.

Four output levels for changing light requirements

Using the white side of the magnetic clip, you can select 40, 60, 80 or 100 per cent of the light's nominal output. Three green LEDs indicate the currently selected level. This allows you to reduce intensity for younger plants and increase it later without repositioning the fixture. Compatible models can be found in the SANlight EVO range.

Fade-in function for a gradual start

The black side of the magnetic clip activates the additional fade-in function. After switch-on, the light gradually increases its output from around 10 per cent to the selected target level. Reaching 100 per cent takes approximately five minutes. An orange LED indicates the current status of the fade-in function.

Direct connection with clearly defined compatibility

The M-Dimmer connects via its blue socket to the blue three-pin connector on a compatible SANlight light. It is suitable for the EVO-Series, EVO COMPACT and the STIXX-Series apart from the STIXX 50. One dimmer is required for each EVO light or each STIXX driver. Growers who require more extensive app-based control can consider the SANlight EVO Bluetooth Dimmer instead. The M-Dimmer is not intended for the SANlight Q-Series.

Technical details:

• Product type: Magnetic dimmer for compatible SANlight LED grow lights
• Power levels: 40%, 60%, 80% and 100%
• Operation: Magnetic clip with separate sides for dimming and fade-in
• Indicators: 3 green LEDs for output level, orange LED for fade-in status
• Fade-in: From approx. 10% to 100% in around 5 minutes
• Connection: Blue three-pin socket
• Power supply: +12 V DC supplied by the connected LED light
• Current consumption: Max. 20 mA
• Temperature range: 0–70 °C
• Compatibility: SANlight EVO-Series, EVO COMPACT and STIXX-Series except STIXX 50
• Not compatible with: SANlight Q-Series or lights with a daisy-chain output
• Requirement: 1 dimmer per EVO light or per STIXX driver
• Manufacturer item number: AB0007
• GTIN: 9120069230840
• Scope of delivery: 1 × SANlight M-Dimmer, 1 × magnetic clip

SANlight M-Dimmer Operating Instructions

SANlight M-Dimmer Operating Instructions