Sanlight LED Set 2x EVO 3-60 1.5

  • ideal for 2 surfaces of 60 x 60 cm
  • 200 Watt - 545 µmol/s per lamp
  • contactless dimmable, also via Bluetooth
  • LEDs from Seoul Semiconductor
829,90 €
incl. 19% VAT , plus shipping costs

  • Item out of stock


Sanlight LED Set 2x EVO 3-60 1.5

  • ideal for 2 surfaces of 60 x 60 cm
  • 200 Watt - 545 µmol/s per lamp
  • contactless dimmable, also via Bluetooth
  • LEDs from Seoul Semiconductor

In addition to two high-performance LED lamps from SANlight, the set includes everything you need in terms of cables and distributors to connect both EVO 3-60 1.5 lamps to each other and to the mains. A single Evo 3-60 1.5 has an output of 545 µmol/s and is ideal for an area of 60 x 60 cm. This means you can easily illuminate areas or boxes of around 60 x 120 cm cleanly for your indoor grow. In addition to the cables and H-distributor, the set also includes a mechanical Omnirex timer from Legrand and two infinitely adjustable ratchet sets from GrowPRO for clever suspension.

Broadband light spectrum and high homogeneity

During the wide-ranging series of experiments with fast-growing and light-hungry plants, SANlight identified the perfect broadband light spectrum with just the right ratio of Far Red to Red for photo-morphogenesis. The emission wavelength here ranges from 400 - 780 nm, with an extremely high efficiency of over 3 µmol/J! All this allows you to increase the quantity and quality of your indoor grow yields. Each individual LED of the EVO 3-60 1.5 is equipped with secondary optics, which not only protect the chip from dirt and oxidation, but also enable extremely homogeneous illumination due to their light-directing properties. In contrast to unprotected LEDs, these optics are easy to clean and thus guarantee flawless operation with high light output for a long time to come.

Quality LEDs, clever mounting options and dimmability

SANlight has also spared nothing in terms of LED quality. The LEDs from Seoul Semiconductor are particularly robust, highly efficient and have a particularly long service life. SANlight states that the 90 % light output (LM90) is 90,000 hours - a remarkable value! The tilt function (tilted suspension of the lamp) saves a lot of space at the top. You can mount the elongated modules on the side next to the ventilation system. By angling the lamp, perfect illumination is still achieved. Whether small grow tent or professional cultivation - every grower can benefit from this. Of course, you can also dim the lamps of the EVO series. The optionally available dimmers (magnetic or Bluetooth) work contactless and are therefore wear-free and completely protected from water and high humidity. The dimming function allows you to easily adapt your new EVO 3 to the development phase of your plants. Since young plants in particular tolerate much less light than older ones and not as much light is needed during growth as during flowering, you can still illuminate your plants from seedling to harvest with the EVO 3. When dimmed, the efficiency is fully maintained and you save quite a bit on electricity costs.

Scope of delivery:
  • 2x EVO 3-60 1.5
  • 1x H-distributor
  • 1x Omnirex mechanical timer by Legrand
  • 1x Mains connection cable EVO & Q series with 90° angle, 2.1 m
  • 2x extension cable Gen2, 1 m (from H-distributor to lamps)
  • 2x GrowPRO ratchet set, steplessly adjustable

Technical details:

  • Power input: 200 watts
  • Power factor: > 0.95
  • Input voltage: 100 - 240 V
  • Length: 468 mm
  • Width: 291 mm
  • Height: 112 mm
  • Photon flux density: 545 µmol/s
  • Efficiency: 3 µmol/y
  • Emission wavelength: 400 - 780 nm
  • Weight: 3.5 kg
  • Protection class: IP65
  • max. rel. humidity: 99 %
  • LM90: > 90,000 h

More on the subject of Indoor Growing:

Grow tents
LED grow lights
Extractor fan kits
Grow nutrients

Write the first review for this item and help others make a purchase decision!

There are no reviews yet.

This item consists of
Others also bought: