Extraction Kit Digital EC 1180 m3/h + Temperatur Controlled
- Extremely quiet ventilation kit for grow tent and grow rooms
- Modern and powerful 1180 m3/h EC-fan
- Very low operating costs
- Precise output control via the climate controller
The Digital 1180 temperature-controlled ventilation kit with a PrimaKlima 160-EC blue extraction fan (flow rate up to 1180 m3/h) operates extremely quietly, efficiently and with maximum precision. The electronically commutated (EC) motor of the PrimaKlima 160-EC blue is based on the latest EC technology and is therefore considerably quieter and more energy-efficient than conventional electric motors. The higher acquisition cost will pay for itself through cheaper energy bills even in the shorter term. Electronically commutated fans also require very little maintenance.
Percentage-accurate control via the controller
The fan is controlled by the PrimaKlima climate controller EC Temp RJEC. This module can be used to adjust the output of the fan to an accuracy of one percent according to the temperature.?The practical one-button operation enables the fan speed (max/min), the target temperature as well as the current temperature to be easily read and set.
The EC Temp RJEC climate controller has an approx. 180 cm long temperature sensor, so that the values can also be easily checked and corrected from outside the grow room or grow tent if necessary. The controller regulates the fan in automatic mode according to the preset values.
Perfect combination in an extraction kit
The Digital 1180 ventilation kit is the best exhaust air combination for medium to large grow tents. The kit is also perfect for use in smaller grow tents. The high-performance fan can then at a low level with minimal noise here. This means that it can be operated at a low output even on smaller installation areas with extremely low noise levels.
Alignment of the volume flow of filter and fan
The size of the carbon filter additionally required depends on the connector diameter as well as the flow output of the fan. The PK 160-EC blue included in this set has a connecting flange of 160 mm and a flow output of 1180 m/h.
We recommend the carbon filter from the PrimaKlima Industry Line with 160 mm flange and an optimum volume flow of 880 m3/h (PK item number K1608) for this kit.
Recommended carbon filters:
Extraction Kit Digital EC 680 m3/h + Temperatur Controlled