2x SANlight Q3WL Generation 2
1x SANlight Gen2 Power Cable
1x SANlight Gen2 Extension Cable, 1 Meter
1x SANlight Gen2 Multi Plug for Q-Series
2x GrowPRO Rope Ratchet Set
1x Legrand Omnirex Timer

2x SANlight Q4WL Generation 2
1x SANlight Gen2 Power Cable
1x SANlight Gen2 Extension Cable, 1 Meter
1x SANlight Gen2 Multi Plug for Q-Series
2x GrowPRO Rope Ratchet Set
1x Legrand Omnirex Timer

2x SANlight Q5W Generation 2
1x SANlight Gen2 Power Cable
1x SANlight Gen2 Extension Cable, 1 Meter
1x SANlight Gen2 Multi Plug for Q-Series
2x GrowPRO Rope Ratchet Set
1x Legrand Omnirex Timer

2x SANlight Q6W Generation 2
1x SANlight Gen2 Power Cable
1x SANlight Gen2 Extension Cable, 1 Meter
1x SANlight Gen2 Multi Plug for Q-Series
2x GrowPRO Rope Ratchet Set
1x Legrand Omnirex Timer

2x SANlight Q4W Generation 2
1x SANlight Gen2 Power Cable
1x SANlight Gen2 Extension Cable, 1 Meter
1x SANlight Gen2 Multi Plug for Q-Series
2x GrowPRO Rope Ratchet Set
1x Legrand Omnirex Timer

• ideal for 2 surfaces of 60 x 60 cm
• 190 Watt - 520 µmol/s per lamp
• contactless dimmable, also via Bluetooth
• LEDs from OSRAM and Seoul Semiconductor

In addition to two high-performance LED lamps from SANlight, the set includes everything you need in terms of cables and distributors to connect both EVO 3-60 lamps to each other and to the mains. A single Evo 3-60 has an output of 520 µmol/s and is ideal for an area of 60 x 60 cm. This means you can easily illuminate areas or boxes of around 60 x 120 cm cleanly for your indoor grow. In addition to the cables and H-distributor, the set also includes a mechanical Omnirex timer from Legrand and two infinitely adjustable ratchet sets from GrowPRO for clever suspension.

• perfectly suitable for 2 surfaces of 80 x 80 cm
• 2x 520 µmol/s - light output full
• Set with H-distributor and cables

If you want to perfectly illuminate two grow boxes with 80 x 80 cm or, for example, an open growing area of 80 x 160 cm, this set is just right for you. Besides the two EVO 3-80 by SANlight, it contains the necessary mains and extension cables, an H-distributor as well as two cable ratchet sets by GrowPRO and a timer by Legrand. Each of your new EVOs has an output of 520 µmol/s, with a power consumption of only 190 watts - a value that is second to none! So you can look forward to strong growing plants and rich harvests in your future indoor grows.

During the wide-ranging series of experiments with fast-growing and light-hungry plants, SANlight identified the perfect broadband light spectrum with just the right ratio of Far Red to Red for photo-morphogenesis. The emission wavelength here ranges from 400 - 780 nm, with an extremely high efficiency of over 3 µmol/J! All this allows you to increase the quantity and quality of your indoor grow yields. Each individual LED of the EVO 3-80 is equipped with secondary optics, which not only protect the chip from dirt and oxidation, but also enable extremely homogeneous illumination due to their light-directing properties. In contrast to unprotected LEDs, these optics are easy to clean and thus guarantee flawless operation with high light output for a long time.

• perfect for grow boxes with 100 x 100 cm
• with connection cables, H-distributor and accessories
• Superior class LED lamps

In order to effectively illuminate a grow box with one square metre of cultivation area, SANlight recommends the use of two EVO 3-100. In addition to the two LED lamps, this set also includes the necessary cables and an H-distributor. Also included are 2 GrowPRO ratchet sets for uncomplicated suspension and a mechanical timer from Legrand. So in the set YOU have the right cables and useful accessories included.

• massive light output of 2 x 696 µmol/s
• Pro set-up for two 80 x 80 cm surfaces
• Quality LEDs with secondary optics

For growers with sufficient experience with high light levels, two EVO 4-80s offer the possibility to get the maximum growth out of their plants in two grow boxes of 80 x 80 cm or a growing area of approximately 80 x 160 cm. With an output of 696 µmol/s, however, you should definitely use a dimmer for young plants and also during the growth phase in order not to damage the plants. Connection cables for the lamps, an H-distributor and an angled mains cable are already included in the set. In addition, there is a mechanical timer from Legrand and two GrowPRO ratchet sets for the suspension.

• Complete set with connection cables, distributor and accessories
• Pro set-up for areas of 100 x 100 cm
• extreme light output of 2 x 696 µmol/s

If you already have a lot of experience with the use of extreme amounts of light and can use additional CO2 in the flowering phase if necessary, two EVO 4-100 per square metre of cultivation area offer you the opportunity to push the performance of your plants to the limits. In the growth phase, you should definitely use dimmers with this set-up. The necessary connection cables and an H-distributor are already included in the set, plus a mechanical timer from Legrand and 2 GrowPRO ratchet sets for the suspension.

• Ideal for mounting areas of 120 x 120 cm
• Necessary H-distributor and connection cable included
• Top efficiency of >3 µmol/J
• with further accessories

Growboxes with a cultivation area of 1.44 sqm can be illuminated with two EVO 4-120 with high lighting intensity and very evenly. Even though no additional CO2 is required with this setup, you should get dimmers for the vegetative phase. The high light intensity of these top LEDs is simply too much for young plants and should only be used to the full when they flower. In addition to the H-distributor and cables, the set also includes a mechanical timer from Legrand and two GrowPRO ratchet sets for uncomplicated installation.

• Complete set with connection cables, H-distributor and accessories
• 870µmol/s at 320W (per lamp) thanks to high-power LEDs
• in professional setup for areas of 120 x 120 cm
• contactless dimmable, also via Bluetooth

The lamps of the EVO 5 series are particularly suitable for open areas. SANlight recommends their use in grow boxes only to a limited extent due to the massive light output and only when using strong ventilation systems and corresponding experience. Two EVO 5-100 for 1.44 sqm already bring a lot of µmol/s of output even on free areas and you should be familiar with high amounts of light so that your plants can also use them and you get rich harvests. Here, the addition of CO2 may be necessary and you should use dimmers in the vegetative phase. The set already includes the necessary connection cables and an H-distributor. An Omnirex timer and two GrowPRO ratchet sets are also included, so you have everything on the lighting side for a quick start.

• ideal for open areas of 1.2 x 1.2 m
• 2x 870µmol/s guarantee a pro setup
• Set complete with cables, H-distributor and accessories
• Quality LEDs from Seoul Semiconductor and Osram

In addition to two EVO 5-120s from SANlight, this set comes with the necessary connection cables and an H-distributor for connecting the second lamp. Two practical GrowPRO-ratchet sets for suspension and a Legrand-timer are also included. With the top LEDs of the EVO 5 series, you will soon have lamps with powerful output and all the advantages of modern LED grow lamps in your grow room. As an experienced grower, nothing stands in the way of a professional set-up for your indoor grow and powerful harvests.

• Secondary optics for optimal light output and homogeneity
• ideal for large growboxes mi 150 x 150 cm
• Cables, H-distributor and other accessories included
• Pro EVO 5-150 870µmol/s light output at only 320 watts

If you are the lucky owner of a very spacious grow box for your indoor grow, you can reach for this practical and convenient set instead of the individual components. Mains cable, H-distributor, the cables for connecting the lamps, an Omnirex timer by Legrand and 2 GrowPRO ratchet sets for easy suspension of the LEDs are included. Since the necessary cables etc. are included in the set, you don't have to search for everything individually.

• ideal for areas of 60 x 60 cm
• Top output of 520 µmol/s with only 190 W
• in set with magnetic dimmer and mains connection cable

If you want to illuminate a grow box with an area of 60 x 60 cm, this set with an EVO 3-60 from SANlight is just right for you. The matching connection cable with a practical angled plug and a waterproof magnetic dimmer are included. After all, this high-tech lamp delivers 520µmol/s, so you can adjust the amount of light to the respective development phases of your plants. When dimmed, you even save quite a bit on electricity costs, as the efficiency of the LEDs is fully maintained.

• In the Pro-Set-up two EVO 4-100 for boxes with 100 x 100 cm
• 696 µmol/s with only 250 Watt - light output full!
• in set with mains connection cable and magnetic dimmer

For a pro set-up, SANlight recommends the use of two EVO 4-100 for an area of 100 x 100 cm. With only one lamp, you can still illuminate cuttings and mother plants perfectly. If you choose the professional set-up, however, you should be familiar with very high light quantities for indoor growing. 2x 696 is already a lot of light - if necessary, the use of additional CO2 can make sense here, for example with a CO2 bag. The set includes a practical magnetic dimmer for infinitely variable adjustment of the light output to the early development phases of your plants and a matching cable with a 90° angled plug for connecting the lamp to the mains supply.

• Two EVO 4-120 are ideal for areas of 120 x 120 cm
• in set with mains connection cable and magnetic dimmer
• Only 250 watts power consumption with 696 µmol/s light output

If you want to illuminate an area of 120 x 120 cm for a high-yield grow, you should choose two EVO 4-120. For cuttings and young plants, you will have enough light with just one lamp. If you choose a set-up with two of these extremely powerful LEDs, you can provide your protégés with a total of 1392 µmol/s light output. That's a lot of light on 1.44 square metres - but your plants can still process it without additional CO2 and produce rich harvests. Nevertheless, you should reduce the amount of light for cuttings and young plants - with the waterproof magnetic dimmer included in the set, this can even be done continuously. A suitable cable with a 90° angled plug is included for connecting the lamp to the mains.

• Set including magnetic dimmer and mains cable (90° plug)
• Powerful 870 µmol/s with only 320 Watt power consumption
• Professional set-up for areas with 100 x 100 cm

For growers experienced in dealing with large amounts of light, the lamps of the EVO 5 series are particularly suitable. The extreme light quantity of 870 µmol/s is better suited for open growing areas than for grow boxes and during the vegetative phase (and even more so for young plants and cuttings), this high-power LED should definitely be reduced in its output. With the magnetic dimmer included in the set, you can continuously adjust the amount of light to the respective development phase of your plants. Since the efficiency of the LEDs is maintained even when dimmed, you save electricity costs by dimming and extend the life of your EVO 5-100. And to ensure that your new lamp is safely connected to the mains, a suitable mains connection cable with a 90° angle plug is included in the set.

• designed for areas with 1m depth
• very high output of 520 µmol/s
• in set with mains connection cable and magnetic dimmer

The SANlight EVO 3-100 was developed for cultivation areas with a depth of 1 meter. For grow boxes with a footprint of 1 sqm, two EVO 3-100 are ideal. With their slim design and around 82 cm length, they fit well to the side next to an activated charcoal filter and enable very even illumination thanks to the tilt function. Of course, you can also work with just one lamp, e.g. when growing cuttings or keeping mother plants. Since one EVO 3-100 already provides a rich 520 µmol/s light output, you can easily adjust the light output to the needs of your plants with the included dimmer. With a dimmed lamp, you even save electricity costs, as the efficiency of the LEDs is fully maintained. The set includes a matching mains connection cable with 90° angled plug.

• in Pro-Set-up suitable for grow boxes with 80 x 80 cm
• Efficiency >3 µmol/J
• High light output: 696 µmol/s at only 250 watts
• in set with mains connection cable and magnetic dimmer

You have plenty of experience with indoor growing and already know your way around high light quantities per square metre? Then the EVO 4-80 for areas of 0.64 sqm is a good choice for you! In the professional set-up, however, this power LED must be dimmed for young plants and in the growth phase due to the very high output of 696 µmol/s! Conveniently, a waterproof dimmer is already included in the set, which allows you to continuously adjust the output to the needs of your protégés. For connection to the mains, a practical mains cable with angled plug is included in the set.

• ideal for surfaces of 80 x 80 cm
• in set with magnetic dimmer and mains connection cable
• Quality LEDs with secondary optics

This set offers you not only a modern SANlight EVO 3-80 but also the matching connection cable (with a space-saving angled plug) and a practical magnetic dimmer. Since this grow lamp delivers a whopping 520 µmol/s and your young plants need less light during the growth phase than during flowering, the use of a dimmer really makes sense. Dimming even saves you some electricity costs, as the efficiency of the LEDs is fully maintained.

• High-end LEDs - perform 870 µmol/s at only 320 watts power consumption
• Set includes mains cable (90° plug) and magnetic dimmer
• Professional set-up with two EVO 5-120 for areas of 120 x 120 cm

SANlight EVO 5-120 is designed for cultivation areas with a depth of 1.2 meters and is the ideal choice for high rooms or open cultivation areas. The models of the EVO 5 series are intended for real pro-grower with experience in handling maximum light quantities and CO2 supplementation if necessary. For effective and even illumination of 2.44 sqm areas, SANlight recommends two EVO 5-120. If you want to use this pro set-up in a grow box, all components - especially the exhaust system - should be perfectly matched. A total of 1540 µmol/s (with two EVO 5) already requires the use of additional CO2 so that the plants can process this amount of light. For the necessary reduction of the light quantity in the growth phase, you can use the contactless magnetic dimmer included in the set. It is 100 % protected against humidity and corrosion and works continuously. The set also includes a matching mains cable with 90° plug.

• Set including magnetic dimmer and mains cable with 90° plug
• very high PPF of 870 µmol/s
• For growing areas with 150cm depth

SANlight EVO 5-150 is designed for cultivation areas with a depth of 1.5 meters and is the ideal choice for high rooms or open cultivation areas. To properly illuminate large growing areas or grow boxes with 2.25 sqm for your grow, you should install two EVO 5-150. With this area you can still manage without additional CO2, but you should still use a powerful exhaust system. Of course, these high-power LEDs must be dimmed for young plants and also during the growth phase. The set includes a practical magnetic dimmer, with which you can continuously adjust the light output to the needs of your plants. As the efficiency of the LEDs is completely maintained, you save a lot of electricity. A suitable cable with 90° plug for the 230 V connection is also included in the set.

The Lumatek 600 Premium grow light set is the perfectly matched component solution for installing a 600W lighting system for operating HPS or metal halide lamps with minimal effort. A quality ballast, a reflector with an E40 socket, time control by LeGrande, as well as the popular Easy Rollers for easy height adjustment of the reflector - this means that nearly every corner of a grow area can be repurposed for growing.

The Lumatek 600 Economy grow light set is the perfectly matched component solution for installing a 600W lighting system for operating HPS or metal halide lamp with minimal effort. A quality ballast, a reflector with an E40 socket, time control by LeGrande, as well as the popular Easy Rollers for easy height adjustment of the reflector - this means that nearly every corner of a grow area can be repurposed for growing.

The Lumatek 400 Premium grow light set is the perfectly matched component solution for installing a 400W lighting system for operating HPS or metal halide lamp with minimal effort. A quality ballast, a reflector with an E40 socket, time control by LeGrande, as well as the popular Easy Rollers for easy height adjustment of the reflector - this means that nearly every corner of a grow area can be repurposed for growing.

The Lumatek 400 Economy grow light set is the perfectly matched component solution for installing a 400W lighting system for operating HPS or metal halide lamps with minimal effort. A quality ballast, a reflector with an E40 socket, time control by LeGrande, as well as the popular Easy Rollers for easy height adjustment of the reflector - this means that nearly every corner of a grow area can be repurposed for growing.

The Lumatek 250 Premium grow light set is the perfectly matched component solution for installing a 250W lighting system for operating HPS or metal halide lamp with minimal effort. A quality ballast, a reflector with an E40 socket, time control by LeGrande, as well as the popular Easy Rollers for easy height adjustment of the reflector - this means that nearly every corner of a grow area can be repurposed for growing.

The Lumatek 250 Economy grow light set is the perfectly matched component solution for installing a 250W lighting system for operating HPS or metal halide lamps with minimal effort. A quality ballast, a reflector with an E40 socket, time control by LeGrande, as well as the popular Easy Rollers for easy height adjustment of the reflector - this means that nearly every corner of a grow area can be repurposed for growing.

This set contains the following articles:
- PRO-V-T 2.0 magnetic ballast, 250W
- Euro reflector with E40 socket
- Flexible moisture-resistant cable 1.5 m
- Cable - open both ends - 4 metres
- Legrand Omnirex Timer (analogue)
- Easy Rollers set, infinitely adjustable, 2 pieces

This set contains the following articles:
- PRO-V-T 2.0 magnetic ballast, 400W
- Euro reflector with E40 socket
- Flexible moisture-resistant cable 1.5 m
- Cable - open both ends - 4 metres
- Legrand Omnirex Timer (analogue)
- Easy Rollers set, infinitely adjustable, 2 pieces

This set contains the following articles:
- PRO-V-T 2.0 magnetic ballast, 400W
- Adjust-A-Wings Avenger Set with heat shield super-spreader, Medium
- Flexible moisture-resistant cable 1.5 m
- Cable - open both ends - 4 metres
- Legrand Omnirex Timer (analogue)
- Easy Rollers set, infinitely adjustable, 2 pieces

This set contains the following articles:
- PRO-V-T 2.0 magnetic ballast, 600W
- Euro reflector with E40 socket
- Flexible moisture-resistant cable 1.5 m
- Cable - open both ends - 4 metres
- Legrand Omnirex Timer (analogue)
- Easy Rollers set, infinitely adjustable, 2 pieces

This set contains the following articles:
- PRO-V-T 2.0 magnetic ballast, 600W
- Adjust-A-Wings Avenger Set with heat shield super-spreader, Medium
- Flexible moisture-resistant cable 1.5 m
- Cable - open both ends - 4 metres
- Legrand Omnirex Timer (analogue)
- Easy Rollers set, infinitely adjustable, 2 pieces

The ESL E40 Economy grow light set is the perfectly matched component solution for operating energy-saving (CFL) lamps with minimal effort. A reflector with an E40 socket, time control by LeGrande, as well as the popular Easy Rollers for easy height adjustment of the reflector - this means that nearly every corner of a grow area can be repurposed for growing.