
Price: 69,00 €
19 % VAT incl.
available now
- Power control without hum
- For fans up to 100 watts
- 5 levels selectable
- with on / off switch
With the SCNR5-CA 5-stage transformer, you can regulate the speed of fans with an output of up to 100 watts over five stages. Unlike simple dimmers, there is no annoying humming noise in the fan motor when using the 5-stage transformer. So if you want to minimise the noise emissions of the grow box during your indoor grow and install the quietest possible exhaust system, the SCNR5-CA is exactly the right power regulator for you.
...
Price: 249,00 €
19 % VAT incl.
available now
- Comprehensive control options for EC fans
- Temperature and humidity control
- Different day/night settings
- Vacuum control
The FanBase EC+ gives you the perfect way to digitally control your indoor grow's EC fans, giving you control over several important parameters
...
Price: 549,90 €
19 % VAT incl.
available now
- 4 digitally switchable sockets
- 8 RJ-45 sockets for EC fans and sensors
- Extensive control options
- Easy to operate, with well-structured menu
With the GrowBase from GrowControl you get full control over all the important parameters of your indoor grow and can control a wide variety of devices. The GrowBase has four switchable outputs with 100 - 240 volts AC à 600 watts, one DC output 12 - 24 volts with max. 1 ampere and eight RJ45 sockets. Operation via rotary knob and buttons is extremely intuitive and easy to handle - you have programmed all parameters in just a few steps!
...
Price: 799,00 €
19 % VAT incl.
available now
- several sensors of the same type can be used
- Extensive climate control options
- 2-pole disconnect from socket 4
- 8 RJ45 sockets for sensors, EC fan and 0 - 10 V control
The GrowBase Pro from GrowControl allows you to completely monitor and control your indoor grow via various switching and measuring interfaces. It has four switchable sockets for the operation of devices with 100 - 240 volts, whereby the fourth socket alone can be loaded with 2300 watts. It has an inrush current limiter and is switched to two poles - two features that are recommended for many LED grow lights. Sockets 1 to 3 are rated at 1200 watts individually and 1600 watts in total. So for pro-growers with a power-hungry set-up, this is more than enough power. In addition to the AC sockets, the GrowBase Pro also has eight RJ45 sockets incl. a DC output (MOSFET) with 12 - 24 volts / 1 ampere.
...
Price: 349,90 €
19 % VAT incl.
available now
- Digital ventilation and climate controller
- control multiple measurements simultaneously
- control fans continuously
- for a maximum of 3 fans
With this digital fan controller from Torin, up to 3 fans in the growbox or growroom can be controlled conveniently and thermostatically. The speed of the fans can be adjusted continuously. The unit comes complete with thermostat and manual.
...
Price: 299,90 €
19 % VAT incl.
not available
- digital climate controller
- for AC and EC fans
- perfect control of the growroom
- temperature, humidity, exhaust air
With this digital climate controller from GSE, you ensure perfect climatic conditions in your growbox or growroom. Temperature, humidity and also the speed of the intake and exhaust fans are very important parameters for a successful grow.
With this digital grow controller, you can control classic AC fans as well as fans with modern EC motors (electronically commuted) conveniently and precisely with a rotary knob. The LCD display makes it easy to read all the values transmitted by the fan. With the rotary control you can also set 15 individual programmes for your grow box.
The probe of the GSE controller is equipped with a light sensor, so day-and-night modes can also be detected. The controller has 2x 5A 230V outputs for an intake fan and an exhaust fan. In addition, there are 2x RJ45 sockets. Furthermore, there is a choice between 0-10V and PWM (pulse width modulation) signal. To protect the GSE controller from overheating, there is an internal temperature sensor on both the heat sink side and the processor side.
...
Price: 134,90 €
19 % VAT incl.
available now
- reliable temperature control
- better fan adjustment
- Convenient one-button operation
- Automatic and manual mode
With the climate controller EC Temp RJEC from PrimaKlima, the fan and thus the temperature in the grow room can be controlled easily and reliably.
All necessary information can be easily checked on the display. Via the practical one-button operation, the fan speed (max/min), the set temperature and the current temperature can be easily read or set.
The climate controller can be operated in an automatic mode as well as manually. In automatic mode, the climate controller regulates the fan according to the respective preset values.
Via the approx. 180 cm long temperature sensor, the climate controller can also be operated very well from outside the grow room. Compatible EC fans (EC here stands for electronically commutated) are, for example:

Price: 179,90 €
19 % VAT incl.
not available
- Climate in the growroom under control at all times
- specifically developed for EC fans
- Control 4 parameters with one unit
- Stepless control
The EC Digital 4 in 1 Controller from the Swiss company CarbonActive ensures a constant temperature and/or humidity in the growroom.
The EC Digital fan controllers are specifically designed for EC (electronically commutated) fan motor technology.
These electronically commutated motors are more energy efficient and significantly quieter than conventional motors. The integrated intelligent electronics generate a rotating magnetic field that pulls the rotor along and takes over control, communication and monitoring.
The CarbonActive EC Digital works with a voltage control that drives the fan with 0 - 10 volts. This sets the effective speed of the fan.

Price: 149,90 €
19 % VAT incl.
available now
Anyone who owns a duct fan knows how annoying the rewiring can be to change its' performance. Dimmers, however, often cause unwanted buzzing noise. Step transformers such as the Sentera step transformer regulate the speed of the motors without additional hum.
...
Price: 429,00 €
19 % VAT incl.
not available
This is a new addition to our grow shop. This text is a placeholder. You may already purchase the product.
...
Price: 128,90 €
19 % VAT incl.
not available
This climate regulator enables temperature-dependent regulation of extractor fan speed for optimal control of the climatic conditions in a grow room. When using in larger rooms, it us usually advisable to implement an air supply and extraction system. In smaller spaces, such as a grow tent, there is usually enough ways to let air flow in (air ducts). The GSE climate controller is suitable for use in large and small spaces and is easily installed using three knobs.
...
Price: 299,90 €
19 % VAT incl.
not available
The GrowControl Carbsense CO2 sensor analyses room air for its CO2 concentration. A cable is supplied to connect it to the GROWBASE EC PRO climate controller. In this way, the CO2 content in the growroom can be precisely controlled.
...
Price: 59,90 €
19 % VAT incl.
available now
The GrowControl Fanspeed EC RJ45 Connection is an easy-to-use fan speed controller for EC fans with a RJ45 connection. Adjustable from 0-100%.
...
Price: 48,90 €
19 % VAT incl.
available now
The GrowControl Fanspeed EC Jack Connection is an easy-to-use fan speed controller for EC fans with a 3.5 mm jack connection. Adjustable from 0-100%.
...
Price: 899,00 €
19 % VAT incl.
not available
The set consists of the following products:

Price: 219,90 €
19 % VAT incl.
not available
The GrowControl CO2 Valve, Pressure Regulator is an addition to the GrowBase EC PRO and GrowBase XT. Through it, the CO2 function can be controlled.
...
Price: 499,00 €
19 % VAT incl.
available now
- No hum from the fans in the lower speed range
- 6-step fan speed adjustment
- Moisture-protected control unit
- ready-to-operate prefabricated unit
This step transformer is suitable for the control of two fans. Especially in the lower speed range, fans can be operated very quietly with the GSE step transformer without humming.
The fan speed is based on humidity and temperature and is controlled up and down to a total of 6 levels.
The sensitivity (hysteresis) for temperature and humidity are adjusted via two controllers.
The entire control unit is protected by a waterproof cover and is particularly suitable for use in damp rooms.
The GSE step transformer is supplied with a low-voltage sensor and a 4m cable and is immediately ready for use.
