AutoPot 1Pot extension kit

AutoPot 1Pot Extension Kit 8.5 L AQUAvalve5 for an additional watering position

The AutoPot 1Pot Extension Kit 8.5 L AQUAvalve5 lets you add another plant position to an existing AutoPot watering system. It combines an 8.5-litre pot with its own 1Pot tray, AQUAvalve5, 9 mm pipe and the required connection components. It is suitable for growers who want to expand an existing 1Pot or easy2grow installation gradually without adding a separate pumped or timer-controlled irrigation circuit.

An individual watering module for one more plant

With the 1Pot design, every plant sits in its own tray. This makes it straightforward to incorporate the additional module into your layout while keeping the spacing between plants appropriate for your growing area. The supplied plant pot has a capacity of 8.5 litres. Other configurations and complete setups are available in the AutoPot 1Pot watering systems range.

AQUAvalve5 controls watering without electricity

The AQUAvalve5 regulates water flow using only gravity pressure from the connected reservoir. It fills the tray to a defined water level, shuts off the supply and opens again once the plant has used the available water. No pump, mains electricity or irrigation timer is required. Its 5 mm inlet provides greater flow than the previous valve generation and helps reduce the risk of deposits and blockages.

Designed for current 9 and 16 mm AutoPot systems

The extension kit is intended for 1Pot and easy2grow installations using 9 mm pipework or a 16 mm main supply line. The supplied 16/9 mm tee connector and additional fittings make it easier to integrate the module into different system layouts. Older AutoPot installations that operate solely with 6 mm pipework are not directly compatible without conversion. Additional pipework, connectors and replacement components are available in the AutoPot accessories range. The reusable square AutoPot AirBase is also suitable for the 8.5-litre pot.

Technical details:

• Product type: Extension module for AutoPot watering systems
• Plant positions: 1
• Pot capacity: 8.5 litres
• Watering valve: AQUAvalve5
• Valve inlet: 5 mm
• Pipe: 9 mm, 1 m included
• Compatibility: AutoPot 1Pot and easy2grow systems using 9 mm or 16 mm pipework
• Operation: gravity-fed without pump, mains electricity or irrigation timer
• SKU: 6787
• Contents: 1 × 8.5-litre plant pot, 1 × 1Pot tray, 1 × tray lid, 1 × AQUAvalve5, 1 × Marix Disc, 1 × Root Control Disc, 1 × 9 mm grommet, 1 × 9 mm tee connector, 1 × 16/9 mm tee connector, 1 × 16/9 mm cross connector, 1 × 1 m 9 mm pipe, 1 × instructions

AutoPot Growers Guide

AutoPot Growers Guide

AutoPot 1Pot Modul Assembly Instructions

AutoPot 1Pot Modul Assembly Instructions