• Adapter and tap in one
• To shut off a 25 mm pipe

With a ball valve you can quickly close individual PE drip hoses of your irrigation system. If, for example, an area of your grow does not need water for a while, this gives you the opportunity to temporarily take it out of the system. Ball valves are extremely robust and will not be clogged by lime or nutrients. Therefore they are especially suitable for indoor and outdoor growing. Your main line only needs a fitting with 3/4 inch male thread at the end.

...

• for connecting 25 mm PE pipe to 3/4 " male thread
• stable and tight
• reusable, without grouting

If you want to connect a 25 mm PE pipe to a 3/4 " fitting in your irrigation system, you can use this coupling. The compression fitting holds securely tight, but can be loosened if necessary. Thus, you can reuse the coupling if necessary later at another point of your Indoor Grows.

...

• robust connection fitting
• connects external thread with hose coupling

If you are looking for an easy way to quickly connect hoses to a tap, you can easily do this with the Gardena tap piece. Your tap only needs to have a 3/4" external thread. The coupling part fits all standard couplings of this size.

...

• robust coupling from Gardena
• with built-in water stop

With this coupling you can connect a water hose of your irrigation system with 13 mm or 1/2 " to a tap piece. The big advantage, especially for indoor growing, is the integrated water stop. This prevents water from running out of the hose at this end after disconnecting the connection when you roll it up or transport it.

...

• connects 16mm hoses with ClickFit connectors

With the ClickFit adaptor you can connect e.g. tanks with AutoPot ClickFit connection to a 16 mm pipe. The adaptor also fits the Gardena-System.

...

• for shutting off 16 mm PE hoses
• simple assembly
• applicable up to 4 bar

With this ball valve you can quickly and reliably close off parts of your irrigation system. The handle only needs to be turned by 90°. A ball with a hole inside will then prevent the flow. Ball valves are extremely robust and do not get clogged by lime or nutrients. Therefore they are particularly suitable for indoor and outdoor growing.

...

• for shutting off 20 mm PE hoses
• simple assembly
• applicable up to 4 bar

With this ball valve you can quickly and reliably close off parts of your irrigation system. The handle only needs to be turned by 90°. A ball with a hole inside will then prevent the flow. Ball valves are extremely robust and do not get clogged by lime or nutrients. Therefore they are particularly suitable for indoor and outdoor growing.

...

• to connect three PE hoses
• fast, simple assembly
• stable and tight fit

With the 90° T-fitting you can connect three 16 mm PE pipes quickly and easily. The pipes cut to length are simply pushed onto the connector and the screw joint is tightened - that's it. This way you can easily branch the main line of your irrigation system and adapt it to your indoor grow.

...

• to connect three PE hoses
• fast, simple assembly
• stable and tight fit

With the 90° T-fitting you can connect two 20 mm PE-pipes with one 16 mm PE pipes quickly and easily. The pipes cut to length are simply pushed onto the connector and the screw joint is tightened - that's it. This way you can easily branch the main line of your irrigation system and adapt it to your indoor grow.

...

• to connect three PE hoses
• fast, simple assembly
• stable and tight fit

With the 90° T-fitting you can connect three 20 mm PE-pipes quickly and easily. The pipes cut to length are simply pushed onto the connector and the screw joint is tightened - that's it. This way you can easily branch the main line of your irrigation system and adapt it to your indoor grow.

...

• robust plastic
• for wall thicknesses up to 40 mm

If you need to connect a tank to your indoor grow, this fitting will serve you well. It is also suitable for tanks with thick materials, such as wooden barrels. Simply drill a 3/4 inch (a good 1.9 cm) hole into the tank and screw in the tank lead-through with the supplied seal. On the outside you can then mount a hose flange with a 3/4 inch female thread.

...

• To securely fix hoses on fittings

This variable hose clamp you can use for hoses with an outer diameter of 12 to 20 mm. You simply change the diameter with a screwdriver, open-end wrench / box wrench or a ratchet.

...

• For secure fixing of hoses on fittings

This variable hose clamp you can use for hoses with an outer diameter of 20 to 32 mm. You can change the diameter by using a screwdriver, open-end wrench / box wrench or a ratchet.

...

• stainless steel spring
• solid brass housing
• prevents backflow of casting water
• safe mounting due to thread

If you use an irrigation system for your grow, you should use a check valve. For example, if there is negative pressure in the domestic water system and your irrigation system is connected to it, the non-return valve prevents contamination of the drinking water. The built-in NBR membrane and the stainless steel spring are extremely durable and can withstand temperatures of up to 100°.

...

• robust material
• for connecting 2 fittings with male thread
• with built-in seal
• reusable

If you want to connect hoses or PE pipes ending on fittings with 3/4 inch male thread, this coupling offers the perfect solution. A rubber seal is directly inserted into the robust PE housing. So you don't need any further sealant like Teflon tape or similar. It won't become any easier and safer than this!

...

• robust positioning spring design
• flow rate 50 - 1000 l/h
• fixed outlet pressure of 1,1 bar
• easy assembly due to thread

With this pressure reducer you can safely reduce line pressures from a maximum of 8 bar to exactly 1.1 bar. The pressure reducer is equipped with a diaphragm and adjusting spring, which guarantees a permanent reliable operation. Regardless of the inlet pressure or the flow rate, it stably maintains a fixed preset outlet pressure of 1.1 bar.

...

• robust positioning spring design
• flow rate 50 - 1000 l/h
• fixed outlet pressure of 2,5 bar
• easy assembly due to thread

With this pressure reducer you can safely reduce line pressures from a maximum of 8 bar to exactly 2.5 bar. The pressure reducer is equipped with a diaphragm and adjusting spring, which guarantees a permanent reliable operation. Regardless of the inlet pressure or the flow rate, it stably maintains a fixed preset outlet pressure of 2.5 bar.

...

• Connection for 20 mm drip tubes to 3/4" external thread
• simple and dense solution
• for drip irrigation

In case you want to connect 20 mm drip tubes to 3/4" tubes / hoses in your drip irrigation system, you can use this practical plug connector. Your 3/4" pipe only needs a fitting with male thread at the end.

...

• Connection for 16 mm drip tubes to 3/4" external thread
• simple and dense solution
• for drip irrigation

In case you want to connect 16 mm drip tubes to 3/4" tubes / hoses in your drip irrigation system, you can use this practical plug connector. Your 3/4" pipe only needs a fitting with male thread at the end.

...

• Connection for 16 mm drip tubes to 1/2" external thread
• simple and dense solution
• for drip irrigation

In case you want to connect 16 mm drip tubes to 1/2" tubes / hoses in your drip irrigation system, you can use this practical plug connector. Your 1/2" pipe only needs a fitting with male thread at the end.

...

• Connection for 5 mm drip tubes to 1/2"
• simple and dense solution
• Fits for 4x6mm micro tube

In case you want to connect 5 mm drip tubes to 1/2" tubes / hoses in your drip irrigation system, you can use this practical plug connector. Your pipe only needs a fitting with 1/2" external thread at the end. The connector also fits 4x6mm micro tubes. For easier assembly we recommend to hold the micro tube in hot water. This will make the hose more flexible and much easier to mount.

...

• connects hoses with 1 and 3/4 inch external thread
• robust and reusable

If you want to securely connect a 1 " hose in your irrigation system to a smaller 3/4 " hose, you should use a sturdy connector. The reduction nipple has a hexagonal shape in the middle for a firm connection and can withstand pressures up to 10 bar.

...

• connects hoses with 1 and 1/2 inch external thread
• robust and reusable

If you want to securely connect a 1 " hose in your irrigation system to a smaller 1/2 " hose, you should use a sturdy connector. The reduction nipple has a hexagonal shape in the middle for a firm connection and can withstand pressures up to 10 bar.

...

• connects hoses with 3/4 and 1/2 inch external thread
• robust and reusable

If you want to securely connect a 3/4 " hose in your irrigation system to a smaller ? " hose, you should use a sturdy connector. The reduction nipple has a hexagonal shape in the middle for a firm connection and can withstand pressures up to 10 bar.

...

• Filter for drip irrigation
• prevents the dropper from clogging
• with threaded connection on both sides

A good filter is essential for your automatic drip irrigation system. It is essential that the water you irrigate your grow should be cleaned of even the smallest particles of dirt, otherwise the drippers and nozzles will clog too quickly. The plastic filter does this job excellently and with minimal maintenance. The filter element (plastic sieve) can be easily removed and cleaned.

...

• Filter for drip irrigation
• prevents the dropper from clogging
• with threaded connection on both sides

A good filter is essential for your automatic drip irrigation system. It is essential that the water you irrigate your grow should be cleaned of even the smallest particles of dirt, otherwise the drippers and nozzles will clog too quickly. The plastic filter does this job excellently and with minimal maintenance. The filter element (plastic sieve) can be easily removed and cleaned.

...

• with threaded flange on both sides
• for easy shut-off of 3/4" cables

With this ball valve you can quickly and reliably close off parts of your irrigation system. The handle only needs to be turned by 90°. A ball with a hole inside will then prevent the flow. Ball valves are extremely robust and do not get clogged by lime or nutrients. Therefore they are particularly suitable for indoor and outdoor growing.

...

• with threaded flange on both sides
• for easy shut-off of 1/2" cables

With this ball valve you can quickly and reliably close off parts of your irrigation system. The handle only needs to be turned by 90°. A ball with a hole inside will then prevent the flow. Ball valves are extremely robust and do not get clogged by lime or nutrients. Therefore they are particularly suitable for indoor and outdoor growing.

...

• Adapter and valve in one
• for shutting off a 20 mm drip tube

With a cylinder valve you can quickly close individual PE drip hoses of your irrigation system. If, for example, an area of your grow does not need water for a while, you have the possibility to temporarily remove it from the system. Ball valves are extremely robust and do not get clogged by lime or nutrients. Therefore they are especially suitable for indoor and outdoor growing. Your main line only needs a fitting with 3/4 inch internal thread at the end.

...

• Adapter and valve in one
• for shutting off a 16 mm drip tube

With a cylinder valve you can quickly close individual PE drip hoses of your irrigation system. If, for example, an area of your grow does not need water for a while, you have the possibility to temporarily remove it from the system. Ball valves are extremely robust and do not get clogged by lime or nutrients. Therefore they are especially suitable for indoor and outdoor growing. Your main line only needs a fitting with 3/4 inch internal thread at the end.

...

• Adapter and valve in one
• for shutting off a 16 mm drip tube

With a cylinder valve you can quickly close individual PE drip hoses of your irrigation system. If, for example, an area of your grow does not need water for a while, you have the possibility to temporarily remove it from the system. Ball valves are extremely robust and do not get clogged by lime or nutrients. Therefore they are especially suitable for indoor and outdoor growing. Your main line only needs a fitting with 1/2 inch internal thread at the end.

...

• tight fitting closure for PE hoses
• simple assembly
• reusable

Easy to install end plug for 16mm PE hose. To avoid loss of water and pressure, you should choose a permanently tight and firmly fitting plug. This end plug for 20 mm PE pipes is 100% tight when installed correctly and can be removed again if necessary and used for further grows.

...

• tight fitting closure for PE hoses
• simple assembly
• reusable

Easy to install end plug for 16mm PE hose. To avoid loss of water and pressure, you should choose a permanently tight and firmly fitting plug. This end plug for 16 mm PE pipes is 100% tight when installed correctly and can be removed again if necessary and used for further grows.

...

• Connector for 20 mm PE hose on 1/2 " thread
• robust and reusable
• with 1/2 inch external thread

With this connection fitting you can connect a 20 mm PE pipe with a hose or pipe with 1/2 inch female thread connection. Since there is also a screw connection on the side of the PE pipe, you can loosen the screw connection again if necessary and use it for further drip irrigation concepts.

...

• Connector for 20 mm PE hose on 3/4 " thread
• robust and reusable
• with 3/4 inch external thread

With this connection fitting you can connect a 20 mm PE pipe with a hose or pipe with 3/4 inch female thread connection. Since there is also a screw connection on the side of the PE pipe, you can loosen the screw connection again if necessary and use it for further drip irrigation concepts.

...

• Connector for 16 mm PE hose on 3/4 " thread
• robust and reusable
• with 3/4 inch external thread

With this connection fitting you can connect a 16 mm PE pipe with a hose or pipe with 3/4 inch female thread connection. Since there is also a screw connection on the side of the PE pipe, you can loosen the screw connection again if necessary and use it for further drip irrigation concepts.

...

• Connector for 16 mm PE hose on 1/2 " thread
• robust and reusable
• with 1/2 inch external thread

With this connection fitting you can connect a 16 mm PE pipe with a hose or pipe with 1/2 inch female thread connection. Since there is also a screw connection on the side of the PE pipe, you can loosen the screw connection again if necessary and use it for further drip irrigation concepts.

...

• practical connector for 20 mm PE pipe on 3/4" thread
• robust and reusable
• for 3/4 inch external thread

With this connection fitting you can connect a 20 mm PE pipe to a water tap or pipe with 3/4 inch male thread connection. Since there is also a screw connection on the side of the PE pipe, you can loosen the screw connection again if necessary and use it for further drip irrigation concepts.

...

• practical connector for 20 mm PE pipe on 1/2" thread
• robust and reusable
• for 1/2 inch external thread

With this connection fitting you can connect a 20 mm PE pipe to a water tap or pipe with 3/4 inch male thread connection. Since there is also a screw connection on the side of the PE pipe, you can loosen the screw connection again if necessary and use it for further drip irrigation concepts.

...

• Fitting for connecting different pipe sizes

With this reduction coupling you can create a watertight and above all stable connection between PE pipes with a diameter of 25 mm and PE pipes with 20 mm. The coupling is screwable and can be unscrewed and reused if necessary.

...

• Fitting for connecting different pipe sizes

With this reduction coupling you can create a watertight and above all stable connection between PE pipes with a diameter of 20 mm and PE pipes with 16 mm. The coupling is screwable and can be unscrewed and reused if necessary.

...

• Connector for 2 25mm PE pipes
• fast and easy assembly

With this screw coupling you can easily and safely connect two PE pipes with a diameter of 25 mm each. You can open the screw connection at any time and continue to use the coupling for watering your groves.

...

• Connector for two 20mm PE pipes of equal thickness
• fast and easy assembly

With this screw coupling you can easily and safely connect two PE pipes with a diameter of 20 mm each. You can open the screw connection at any time and continue to use the coupling for watering your groves.

...

• Connector for two 16mm PE pipes of equal thickness
• fast and easy assembly

With this screw coupling you can easily and safely connect two PE pipes with a diameter of 16 mm each. You can open the screw connection at any time and continue to use the coupling for watering your groves.

...

• Inline water tap for 16 mm pipes
• simple installation

You can install the AutoPot 16 mm faucet into a main line of your irrigation system in just a few simple steps.

...

• For connecting 16 mm pipes
• reusable
• easy handling
• 100 % tight

With this cross connector you can connect four 16 mm lines of your AutoPot irrigation system. For example, if you need 2 branches from one main line, the cross connector is the perfect choice.

...

• For connecting 16 mm pipes
• 100 % tight
• easy handling
• reusable

With this T - connector you can connect three 16 mm lines of your AutoPot irrigation system and thus build, for example, a branch.

...