• suitable for surfaces of 150 x 150 cm in the Pro set-up
• suitable for areas of 180 x 180 cm in the standard set-up
• extremely high light output - 2925 µmol/s
• Quality LEDs from Lumiled and Osram

Zeus 1000W Xtreme PPFD CO2 - brighter than bright! The flagship of the Zeus series convinces with an effectiveness of up to 2.9 µmol/J at a PPF 2925 µmol/s. Lumatek achieves these top values with the Zeus Xtreme by using high-grade power LEDs from the well-known quality brands Osram and Lumiled.

• new seriesX - completely redesigned
• replaces 1000 W NDL lamp
• 2-channel dimming for grow and bloom spectrum
• with UV-A and far-red
• for grow boxes up to 150 x 150 cm

The new GCx series from the German Greenception developers seamlessly follows the previous series in terms of quality and performance - but with outstanding new features! The GCx 25 LED grow lamp replaces a conventional NDL with 1000 watts, but consumes only 750 watts. Due to its square shape, it enables a very homogeneous illumination of your indoor grow, as grow boxes usually have a square base. Here, this design is better suited than the often elongated LED grow lights. The GCx 25 is suitable for grow boxes with a surface area of 150 x 150 cm in ECO mode or 120 x 120 cm in Boost mode.

• Secondary optics for optimal light output and homogeneity
• ideal for large growboxes mi 150 x 150 cm
• Cables, H-distributor and other accessories included
• Pro EVO 5-150 870µmol/s light output at only 320 watts

If you are the lucky owner of a very spacious grow box for your indoor grow, you can reach for this practical and convenient set instead of the individual components. Mains cable, H-distributor, the cables for connecting the lamps, an Omnirex timer by Legrand and 2 GrowPRO ratchet sets for easy suspension of the LEDs are included. Since the necessary cables etc. are included in the set, you don't have to search for everything individually.

• Complete set with connection cables, H-distributor and accessories
• 870µmol/s at 320W (per lamp) thanks to high-power LEDs
• in professional setup for areas of 120 x 120 cm
• contactless dimmable, also via Bluetooth

The lamps of the EVO 5 series are particularly suitable for open areas. SANlight recommends their use in grow boxes only to a limited extent due to the massive light output and only when using strong ventilation systems and corresponding experience. Two EVO 5-100 for 1.44 sqm already bring a lot of µmol/s of output even on free areas and you should be familiar with high amounts of light so that your plants can also use them and you get rich harvests. Here, the addition of CO2 may be necessary and you should use dimmers in the vegetative phase. The set already includes the necessary connection cables and an H-distributor. An Omnirex timer and two GrowPRO ratchet sets are also included, so you have everything on the lighting side for a quick start.

• ideal for open areas of 1.2 x 1.2 m
• 2x 870µmol/s guarantee a pro setup
• Set complete with cables, H-distributor and accessories
• Quality LEDs from Seoul Semiconductor and Osram

In addition to two EVO 5-120s from SANlight, this set comes with the necessary connection cables and an H-distributor for connecting the second lamp. Two practical GrowPRO-ratchet sets for suspension and a Legrand-timer are also included. With the top LEDs of the EVO 5 series, you will soon have lamps with powerful output and all the advantages of modern LED grow lamps in your grow room. As an experienced grower, nothing stands in the way of a professional set-up for your indoor grow and powerful harvests.

• massive PPF of 1770 µmol/s
• Efficiency of up to 2.9 µmol/y
• external dimming / controllable via optional panel
• Full spectrum LED for growth and flowering phase

With the 2.9 version of the successful Zeus PRO series, Lumatek has raised the bar yet again. An exceptionally high efficiency of up to 2.9 µmol/y (depending on mains voltage) allow the Zeus 600W PRO 2.9 to achieve a massive PPF of 1770 µmol/s with only 615 watts of power consumption. The Clear Glue protective covers with 99 % light transmission prevent the high-performance LEDs from Osram and Lumiled from becoming dirty or corroding in the humid grow box climate. This allows the cleverly arranged LEDs to emit their light efficiently and evenly distributed onto the growing surface throughout their entire service life.

• new seriesX - completely redesigned
• replaces 600 W NDL lamp
• for grow boxes up to 120 x 120 cm
• 2-channel dimming for grow and bloom spectrum
• with UV-A and far-red

The new GCx series from the German Greenception developers seamlessly follows the previous series in terms of quality and performance - but with outstanding new features! The GCx 16 LED grow lamp replaces a conventional NDL with 600 watts, but consumes only 480 watts. Due to its square shape, it enables a very homogeneous illumination of your indoor grow, as grow boxes usually have a square base. Here, this design is better suited than the often elongated LED grow lights. The GCx 16 is suitable for grow boxes with a surface area of 120 x 120 cm in ECO mode or 100 x 100 cm in Boost mode.

• massive light output of 2 x 696 µmol/s
• Pro set-up for two 80 x 80 cm surfaces
• Quality LEDs with secondary optics

For growers with sufficient experience with high light levels, two EVO 4-80s offer the possibility to get the maximum growth out of their plants in two grow boxes of 80 x 80 cm or a growing area of approximately 80 x 160 cm. With an output of 696 µmol/s, however, you should definitely use a dimmer for young plants and also during the growth phase in order not to damage the plants. Connection cables for the lamps, an H-distributor and an angled mains cable are already included in the set. In addition, there is a mechanical timer from Legrand and two GrowPRO ratchet sets for the suspension.

• Complete set with connection cables, distributor and accessories
• Pro set-up for areas of 100 x 100 cm
• extreme light output of 2 x 696 µmol/s

If you already have a lot of experience with the use of extreme amounts of light and can use additional CO2 in the flowering phase if necessary, two EVO 4-100 per square metre of cultivation area offer you the opportunity to push the performance of your plants to the limits. In the growth phase, you should definitely use dimmers with this set-up. The necessary connection cables and an H-distributor are already included in the set, plus a mechanical timer from Legrand and 2 GrowPRO ratchet sets for the suspension.

• Ideal for mounting areas of 120 x 120 cm
• Necessary H-distributor and connection cable included
• Top efficiency of >3 µmol/J
• with further accessories

Growboxes with a cultivation area of 1.44 sqm can be illuminated with two EVO 4-120 with high lighting intensity and very evenly. Even though no additional CO2 is required with this setup, you should get dimmers for the vegetative phase. The high light intensity of these top LEDs is simply too much for young plants and should only be used to the full when they flower. In addition to the H-distributor and cables, the set also includes a mechanical timer from Legrand and two GrowPRO ratchet sets for uncomplicated installation.

• Very high efficiency of up to 2.9 µmol/y
• PPF 1353 µmol/s
• Full spectrum LED for growth and flowering phase
• External dimming / controllable via optional panel

With the 2.9 version of the successful Zeus PRO series, Lumatek has raised the bar yet again. An exceptionally high efficiency of up to 2.9 µmol/y (depending on mains voltage) allow the Zeus 465W PRO 2.9 to achieve a massive PPF of 1353 µmol/s with only 475 watts of power consumption. The Clear Glue protective covers with 99 % light transmission prevent the high-performance LEDs from Osram and Lumiled from becoming dirty or corroding in the humid grow box climate. This allows the cleverly arranged LEDs to emit their light efficiently and evenly distributed onto the growing surface over their entire service life.

• perfect for grow boxes with 100 x 100 cm
• with connection cables, H-distributor and accessories
• Superior class LED lamps

In order to effectively illuminate a grow box with one square metre of cultivation area, SANlight recommends the use of two EVO 3-100. In addition to the two LED lamps, this set also includes the necessary cables and an H-distributor. Also included are 2 GrowPRO ratchet sets for uncomplicated suspension and a mechanical timer from Legrand. So in the set YOU have the right cables and useful accessories included.

• ideal for 2 surfaces of 60 x 60 cm
• 190 Watt - 520 µmol/s per lamp
• contactless dimmable, also via Bluetooth
• LEDs from OSRAM and Seoul Semiconductor

In addition to two high-performance LED lamps from SANlight, the set includes everything you need in terms of cables and distributors to connect both EVO 3-60 lamps to each other and to the mains. A single Evo 3-60 has an output of 520 µmol/s and is ideal for an area of 60 x 60 cm. This means you can easily illuminate areas or boxes of around 60 x 120 cm cleanly for your indoor grow. In addition to the cables and H-distributor, the set also includes a mechanical Omnirex timer from Legrand and two infinitely adjustable ratchet sets from GrowPRO for clever suspension.

• perfectly suitable for 2 surfaces of 80 x 80 cm
• 2x 520 µmol/s - light output full
• Set with H-distributor and cables

If you want to perfectly illuminate two grow boxes with 80 x 80 cm or, for example, an open growing area of 80 x 160 cm, this set is just right for you. Besides the two EVO 3-80 by SANlight, it contains the necessary mains and extension cables, an H-distributor as well as two cable ratchet sets by GrowPRO and a timer by Legrand. Each of your new EVOs has an output of 520 µmol/s, with a power consumption of only 190 watts - a value that is second to none! So you can look forward to strong growing plants and rich harvests in your future indoor grows.

During the wide-ranging series of experiments with fast-growing and light-hungry plants, SANlight identified the perfect broadband light spectrum with just the right ratio of Far Red to Red for photo-morphogenesis. The emission wavelength here ranges from 400 - 780 nm, with an extremely high efficiency of over 3 µmol/J! All this allows you to increase the quantity and quality of your indoor grow yields. Each individual LED of the EVO 3-80 is equipped with secondary optics, which not only protect the chip from dirt and oxidation, but also enable extremely homogeneous illumination due to their light-directing properties. In contrast to unprotected LEDs, these optics are easy to clean and thus guarantee flawless operation with high light output for a long time.

• new seriesX - completely redesigned
• replaces 400 W NDL lamp
• for grow boxes up to 100 x 100 cm
• 2-channel dimming for grow and bloom spectrum
• with UV-A and far-red

The new GCx series from the German Greenception developers seamlessly follows the previous series in terms of quality and performance - but with outstanding new features! The GCx 9 LED grow lamp replaces a conventional NDL with 400 watts, while consuming only 270 watts. Due to its square shape, it enables a very homogeneous illumination of your indoor grow, as grow boxes usually have a square base. Here, this design is better suited than the often elongated LED grow lights. The GCx 9 is suitable for grow boxes with an area of 100 x 100 cm in ECO mode or 80 x 80 cm in Boost mode.

• Set including magnetic dimmer and mains cable with 90° plug
• very high PPF of 870 µmol/s
• For growing areas with 150cm depth

SANlight EVO 5-150 is designed for cultivation areas with a depth of 1.5 meters and is the ideal choice for high rooms or open cultivation areas. To properly illuminate large growing areas or grow boxes with 2.25 sqm for your grow, you should install two EVO 5-150. With this area you can still manage without additional CO2, but you should still use a powerful exhaust system. Of course, these high-power LEDs must be dimmed for young plants and also during the growth phase. The set includes a practical magnetic dimmer, with which you can continuously adjust the light output to the needs of your plants. As the efficiency of the LEDs is completely maintained, you save a lot of electricity. A suitable cable with 90° plug for the 230 V connection is also included in the set.

• Saturated light output of 870µmol/s
• optimal homogeneity and luminous efficacy due to secondary optics
• Two EVO 5-150 are perfect for 150 x 150 cm grow boxes
• Quality LEDs from Osram and Seoul Semiconductor

The models of the new EVO 5 series have been designed for experienced growers with demands for extreme light output. As with previous models, SANlight is once again setting new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lamps and are currently unrivalled on the market.

• The next generation of LED Grow Lights
• maximum yield, light output, highest efficiency
• passive, noiseless cooling
• more than 100,000 hours of working life possible

With the new Generation 2 of its Q series, the Austrian firm SANlight has once again optimised its already outstanding LED plant light system. SANlight is the first manufacturer to use the 2mm² High Power Chip from Osram consistently in all available models. The results: 15% more light output for the same energy consumption rate! The experience with SANlight LEDs is consistently positive. The LED Grow Panels from SANlight generate consistently higher output at considerably lower operating costs as comparable HPS grow lights.

• Set including magnetic dimmer and mains cable (90° plug)
• Powerful 870 µmol/s with only 320 Watt power consumption
• Professional set-up for areas with 100 x 100 cm

For growers experienced in dealing with large amounts of light, the lamps of the EVO 5 series are particularly suitable. The extreme light quantity of 870 µmol/s is better suited for open growing areas than for grow boxes and during the vegetative phase (and even more so for young plants and cuttings), this high-power LED should definitely be reduced in its output. With the magnetic dimmer included in the set, you can continuously adjust the amount of light to the respective development phase of your plants. Since the efficiency of the LEDs is maintained even when dimmed, you save electricity costs by dimming and extend the life of your EVO 5-100. And to ensure that your new lamp is safely connected to the mains, a suitable mains connection cable with a 90° angle plug is included in the set.

• High-end LEDs - perform 870 µmol/s at only 320 watts power consumption
• Set includes mains cable (90° plug) and magnetic dimmer
• Professional set-up with two EVO 5-120 for areas of 120 x 120 cm

SANlight EVO 5-120 is designed for cultivation areas with a depth of 1.2 meters and is the ideal choice for high rooms or open cultivation areas. The models of the EVO 5 series are intended for real pro-grower with experience in handling maximum light quantities and CO2 supplementation if necessary. For effective and even illumination of 2.44 sqm areas, SANlight recommends two EVO 5-120. If you want to use this pro set-up in a grow box, all components - especially the exhaust system - should be perfectly matched. A total of 1540 µmol/s (with two EVO 5) already requires the use of additional CO2 so that the plants can process this amount of light. For the necessary reduction of the light quantity in the growth phase, you can use the contactless magnetic dimmer included in the set. It is 100 % protected against humidity and corrosion and works continuously. The set also includes a matching mains cable with 90° plug.

• designed for experienced growers - 870µmol/s at 320W
• for use in open grow rooms
• we recommend two EVO 5-100 for 120 x 120 cm in Pro setup
• dimmable via Bluetooth or magnetic dimmer

The EVO 5 models of the new EVO series are primarily intended for professionals and very experienced growers. Due to the massive light output, the use in grow boxes is not recommended by the manufacturer; this high-performance LED is better suited for open cultivation areas. As before, SANlight once again sets new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the successful lamp concept has been further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lamps and are currently unrivalled on the market.

• For open spaces and high rooms
• for pro-grows - performs 870µmol/s at only 320W
• Two EVO 5-120 are ideal for 120 x 120 cm in Pro setup
• Quality LEDs from Osram and Seoul Semiconductor

The EVO 5 models of the new EVO series are primarily intended for professionals and very experienced growers. Due to the massive light output, the use in grow boxes is not recommended by the manufacturer, this high-power LED is better suited for open growing areas. As before, SANlight once again sets new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the successful lamp concept has been further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• Top efficiency of 2.7 µmol/y, top PPF of 816 µmol/s
• Full spectrum LED for growth and flowering phase
• Improved LEDs in optimised arrangement
• Very uniform light distribution

The new ATS 300W PRO performs a whopping photon flux of 816 µmol/s and shines with a more finely tuned distribution of the individual LEDs, resulting in an even more even and better light distribution. The Pro models are protected against water and dirt to IP65 by Clear Glue protective covers, with the new type of cover having 99% light transmission.

The Lumatek Control Panel is a digital lighting controller that offers outstanding control over your lighting kits. Using highly innovated technology, this controller smartly monitors your room temperatures, light timing, automation, safety control and dimming. Simply connect it to your Lumatek Controllable Ballasts and easily regulate your grow room environment.

• The next generation of LED Grow Lights
• maximum yield, light output, highest efficiency
• passive, noiseless cooling
• more than 100,000 hours of working life possible

With the new Generation 2 of its Q series, the Austrian firm SANlight has once again optimised its already outstanding LED plant light system. SANlight is the first manufacturer to use the 2mm² High Power Chip from Osram consistently in all available models. The results: 15% more light output for the same energy consumption rate! The experience with SANlight LEDs is consistently positive. The LED Grow Panels from SANlight generate consistently higher output at considerably lower operating costs as comparable HPS grow lights.

• In the Pro-Set-up two EVO 4-100 for boxes with 100 x 100 cm
• 696 µmol/s with only 250 Watt - light output full!
• in set with mains connection cable and magnetic dimmer

For a pro set-up, SANlight recommends the use of two EVO 4-100 for an area of 100 x 100 cm. With only one lamp, you can still illuminate cuttings and mother plants perfectly. If you choose the professional set-up, however, you should be familiar with very high light quantities for indoor growing. 2x 696 is already a lot of light - if necessary, the use of additional CO2 can make sense here, for example with a CO2 bag. The set includes a practical magnetic dimmer for infinitely variable adjustment of the light output to the early development phases of your plants and a matching cable with a 90° angled plug for connecting the lamp to the mains supply.

• Two EVO 4-120 are ideal for areas of 120 x 120 cm
• in set with mains connection cable and magnetic dimmer
• Only 250 watts power consumption with 696 µmol/s light output

If you want to illuminate an area of 120 x 120 cm for a high-yield grow, you should choose two EVO 4-120. For cuttings and young plants, you will have enough light with just one lamp. If you choose a set-up with two of these extremely powerful LEDs, you can provide your protégés with a total of 1392 µmol/s light output. That's a lot of light on 1.44 square metres - but your plants can still process it without additional CO2 and produce rich harvests. Nevertheless, you should reduce the amount of light for cuttings and young plants - with the waterproof magnetic dimmer included in the set, this can even be done continuously. A suitable cable with a 90° angled plug is included for connecting the lamp to the mains.

• in Pro-Set-up suitable for grow boxes with 80 x 80 cm
• Efficiency >3 µmol/J
• High light output: 696 µmol/s at only 250 watts
• in set with mains connection cable and magnetic dimmer

You have plenty of experience with indoor growing and already know your way around high light quantities per square metre? Then the EVO 4-80 for areas of 0.64 sqm is a good choice for you! In the professional set-up, however, this power LED must be dimmed for young plants and in the growth phase due to the very high output of 696 µmol/s! Conveniently, a waterproof dimmer is already included in the set, which allows you to continuously adjust the output to the needs of your protégés. For connection to the mains, a practical mains cable with angled plug is included in the set.

• 2 zone controller
• up to 400x HID or 100x LED controllable
• with time, load and temperature control
• easy to read display, easy programming

With the Lumatek Digital Panel PLUS 2.0, you can professionally control the lighting units of really large grow projects. Two separately controllable zones are available, each of which can control either up to 200 controllable HID ballasts with the same output or 50 identical LED lamps from Lumatek. This means you can either supply two separate grow rooms or control two lamp circuits in one room with different wattages.

• ideal for areas of 80 x 80 cm in the Pro setup
• Top efficiency of >3 µmol/y
• new, completely revised series
• Optional dimming, contactless and via Bluetooth

With the new EVO series, SANlight is once again setting new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• We recommend two EVO 4-100 for 100 x 100 cm in Pro setup
• 696 µmol/s at 250 watts - extreme light output
• Top efficiency of >3 µmol/J
• Dimmable, also via Bluetooth

With the new EVO series, SANlight once again sets new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• we recommend two EVO 4-120 for grow boxes with 120 x 120 cm
• Top efficiency of >3 µmol/J
• 696 µmol/s at 250 watts - extreme light output
• Via Bluetooth or magnetic dimmer dimmable

With the new EVO series, SANlight is once again setting new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• The next generation of LED Grow Lights
• maximum yield, light output, highest efficiency
• passive, noiseless cooling
• more than 100,000 hours of working life possible

With the new Generation 2 of its Q series, the Austrian firm SANlight has once again optimised its already outstanding LED plant light system. SANlight is the first manufacturer to use the 2mm² High Power Chip from Osram consistently in all available models. The results: 15% more light output for the same energy consumption rate! The experience with SANlight LEDs is consistently positive. The LED Grow Panels from SANlight generate consistently higher output at considerably lower operating costs as comparable HPS grow lights.

• The next generation of LED Grow Lights
• maximum yield, light output, highest efficiency
• passive, noiseless cooling
• more than 100,000 hours of working life possible

With the new Generation 2 of its Q series, the Austrian firm SANlight has once again optimised its already outstanding LED plant light system. SANlight is the first manufacturer to use the 2mm² High Power Chip from Osram consistently in all available models. The results: 15% more light output for the same energy consumption rate! The experience with SANlight LEDs is consistently positive. The LED Grow Panels from SANlight generate consistently higher output at considerably lower operating costs as comparable HPS grow lights.

• ideal for areas of 60 x 60 cm
• Top output of 520 µmol/s with only 190 W
• in set with magnetic dimmer and mains connection cable

If you want to illuminate a grow box with an area of 60 x 60 cm, this set with an EVO 3-60 from SANlight is just right for you. The matching connection cable with a practical angled plug and a waterproof magnetic dimmer are included. After all, this high-tech lamp delivers 520µmol/s, so you can adjust the amount of light to the respective development phases of your plants. When dimmed, you even save quite a bit on electricity costs, as the efficiency of the LEDs is fully maintained.

• designed for areas with 1m depth
• very high output of 520 µmol/s
• in set with mains connection cable and magnetic dimmer

The SANlight EVO 3-100 was developed for cultivation areas with a depth of 1 meter. For grow boxes with a footprint of 1 sqm, two EVO 3-100 are ideal. With their slim design and around 82 cm length, they fit well to the side next to an activated charcoal filter and enable very even illumination thanks to the tilt function. Of course, you can also work with just one lamp, e.g. when growing cuttings or keeping mother plants. Since one EVO 3-100 already provides a rich 520 µmol/s light output, you can easily adjust the light output to the needs of your plants with the included dimmer. With a dimmed lamp, you even save electricity costs, as the efficiency of the LEDs is fully maintained. The set includes a matching mains connection cable with 90° angled plug.

• ideal for surfaces of 80 x 80 cm
• in set with magnetic dimmer and mains connection cable
• Quality LEDs with secondary optics

This set offers you not only a modern SANlight EVO 3-80 but also the matching connection cable (with a space-saving angled plug) and a practical magnetic dimmer. Since this grow lamp delivers a whopping 520 µmol/s and your young plants need less light during the growth phase than during flowering, the use of a dimmer really makes sense. Dimming even saves you some electricity costs, as the efficiency of the LEDs is fully maintained.

• strong PPF of 520 µmol/s
• 2 lamps are ideal for areas of 100 x 100 cm
• Dimmable and very flexible in use
• Quality LEDs with secondary optics

With the new EVO series, SANlight is once again setting new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• Top efficiency of >3 µmol/J
• ideal for areas of 60 x 60 cm
• Quality LEDs with secondary optics
• dimmable and very flexible in use

With the new EVO series, SANlight is once again setting new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• Quality LEDs from Osram and Seoul Semiconductor
• ideal for areas of 80 x 80 cm
• Top efficiency of >3 µmol/J
• dimmable and very flexible to use

With the new EVO series, SANlight once again sets new standards in LED plant lighting in terms of quality, design and performance. In the in-house laboratories, the already successful lamp concept was further developed in extensive empirical tests and improved again in essential points. The new EVO 3, EVO 4 and EVO 5 models rank in the top class of LED grow lights and are currently unrivalled on the market.

• Improved diodes in all colour ranges
• Very high output - 508 µmol/s at only 205 watts
• Full spectrum LED for growth and flowering phase
• IP65 protected

The new PRO models in Lumatek's Attis series offer some interesting advantages over the standard models. In addition to a higher photon flux of 508 µmol/s, the ATS 200W PRO has a different distribution of diodes, resulting in an even more even and better light distribution. The Pro models are protected against water and dirt to IP65 by Clear Glue protective covers, with the new type of cover having 99% light transmission.

• The next generation of LED Grow Lights
• maximum yield, light output, highest efficiency
• passive, noiseless cooling
• more than 100,000 hours of working life possible

With the new Generation 2 of its Q series, the Austrian firm SANlight has once again optimised its already outstanding LED plant light system. SANlight is the first manufacturer to use the 2mm² High Power Chip from Osram consistently in all available models. The results: 15% more light output for the same energy consumption rate! The experience with SANlight LEDs is consistently positive. The LED Grow Panels from SANlight generate consistently higher output at considerably lower operating costs as comparable HPS grow lights.

• new seriesX - completely redesigned
• replaces 250 W NDL lamps
• for grow boxes up to 80 x 80 cm
• 2-channel dimming for grow and bloom spectrum
• with UV-A and far-red

The new GCx series from the German Greenception developers seamlessly follows the previous series in terms of quality and performance - but with outstanding new features! The GCx 4 LED grow lamp replaces a conventional NDL with 250 watts while consuming only 120 watts. Due to its square shape, it enables a very homogeneous illumination of your indoor grow, as grow boxes usually have a square base. Here, this design is better suited than the often elongated LED grow lights. The GCx 4 is suitable for grow boxes with a surface area of 80 x 80 cm in ECO mode or 60 x 60 cm in Boost mode.

The Lumatek 315 W CMH Kit consists of the 315 Watt Lumatek ballast, a Lumatek 315W CMH lamp (Agro 3100), and an E40 adapter.

This ballast is already being used in indoor plantations worldwide and uses the principle of square waves to ignite and operate the 315 W ceramic metal halide lamp. The ballast is designed for the Lumatek 315W CMH lamps (4200K Daylight and 3100K Agro available), as well as for CMH lamps operated by Philips. Of course, the 315 watt Lumatek ballast is also dimmable for optimal lighting.

The Lumatek 600W digital ballast provides a stable precise voltage to the lamp creating a higher PAR/PPF output and yet is far more energy efficient than most other ballasts on the market. The latest high output 600W horticultural ballasts from Lumatek are designed to give high yeilds of top quality results, year after year. Featuring 4 different settings from 250w to 660W, this ballast can be used progressively to give the optimum performance for each stage of your grow and can be used with both high pressure sodium or metal halide lamps.

The Lumatek 600W digital ballast is considered to be the most powerful, most efficient, and safest electronic ballast on the market. According to the manufacturer, it generates up to 27% higher light output (lumens) with a generally low level of power consumption, and operates silently. Even in long-term operation, the device will only become lukewarm and has an automatic interrupt mechanism for increased safety in case of a short or power surge.

An electronic ballast in the 400w class with the popular Lumatek Superlumen function: Both output levels (250W, 400W) are complemented by two additional levels, each with around 10% more power! As such, HPS lamps can be pushed up to 275W or 440W. (Metal halide lamps may only be operated at their respective output level).

The popular wing reflector by Adjust-A-Wings in large. 
The large Avenger makes almost any lamp more efficient!

The popular wing reflector by Adjust-A-Wings in large! The Adjust-A-Wings Avenger Medium's glass coating increases light reflection by up to 97%. Constructed in the same way as the "Stucco" model, this reflector illuminates evenly, which enables optimal surface illumination and light output.

The NXE 400W from GIB Lighting is an incredibly efficient, yet compact and safe ballast, which allows the indoor gardener to care for remarkable gardens. Another practical advantage of this ballast is the choice of four output levels, which on one hand allow for the operation of a powerful 400W lamp, but also allow for dimmed, and therefore energy-saving operation (of HPS lamps only) for less light-hungry phases of the plant?s life.

The clever option when choosing a ballast in the low output range is the dimmable Lumatek 250W. Unlike the 250W Lumatek with a Superlumen switch, you can also operate suitable HPS and metal halide lamps at 150W, or you can also ?dim down? 250W HPS lamps to the lower output levels. As such, you can adjust the light output for more light-sensitive phases of the plant?s life, while reducing power consumption at the same time.

Cap-Base: PGZX18
Color Code: 942 (CCT of 4200K)
Color Designation: Cool White
Design Mean Lumens: 30780 lm
Luminous Efficacy (Nom): 109 lm/W
Power: 315.0 Watt
Lamp Current Run-Up: 4,7A
Re-Ignition Time: 10 min

Cap-Base: PGZX18
Color Code: 930 (CCT of 3000K)
Color Designation: Warm White
Design Mean Lumens: 31500 lm
Luminous Efficacy (Nom): 115 lm/W
Power: 315.0 Watt
Lamp Current Run-Up: 4,7A
Re-Ignition Time: 10 min

The energy saving lamps from Elektrox with a light colour spectrum that is ideal for the plant growth and flowering phases.

The energy saving lamps from Elektrox with a light colour spectrum that is ideal for the plant growth and flowering phases.

Low consumption, but still offers flexible settings. The dimmable NXE 250W from GIB Lighting is a clever choice in the low-energy area, which offers the small-scale gardener a lot of options. With the 275W setting, you can compensate for the reduced performance of older lamps (or ?boost? new lamps), whereas the lower output levels (125W, 190W) allow you to flexibly adjust the energy consumption of HPS lamps according to the varying light-related needs of the plant.

This ceramic metal halide (CMH, also known as CDM/LEC) lamp produces less heat than sodium lamps. This allows the reflector to be moved closer to the plants and requires less ventilation.  

The Adjust-A-Wings Avenger Medium's glass coating increases light reflection by up to 97%. Constructed in the same way as the "Enforcer" model, this reflector illuminates evenly, which enables optimal surface illumination and light output.

The energy saving lamps from Elektrox with a light colour spectrum that is ideal for the plant growth and flowering phases.

The SANlight FLEX series is a compact and powerful LED illumination solution for use in multi-layer systems, Interlighting applications and as an additional light to existing luminaires.

This is a new addition to our grow shop. This text is a placeholder. You may already purchase the product.

The cutting fitting provides everything you could wish for: Very easy to operate and more than enough for the plants to be able to thrive.

The popular reflector by Adjust-A-Wings, in efficient titanium white. The reflector, like all Adjust-A-Wings models, is made from light, rust-free aluminium and is coated with a resistant, easy-to-clean polymer sheeting. This sheeting is extremely resistant to heat and distributes the light more evenly than any other Adjust-A-Wing reflector. This reflector reaches slightly lower light reflection values than the Avenger models, for example, but this effect is negligible thanks to the particularly even light distribution.

This special, energy-saving plant lighting with a light colour spectrum suitable for the flowering or fruit formation phase offers high performance with low power consumption.

This special, energy-saving plant lighting with a light colour spectrum suitable for the flowering or fruit formation phase offers high performance with low power consumption.

The wing-shaped reflective surfaces mean that this reflector illuminates evenly, which enables optimal surface illumination and light output. The matte stucco surface enhances the effect of the particularly even illumination.

Light is a crucial requirement for photosynthesis, and therefore also for the growth of any plant. Plants thrive best in sunlight, as this provides a balanced light spectrum. However, plants can?t always be grown outside. In most cases, conventional indoor lighting is not sufficient to ensure good photosynthesis performance.

The affordable option from the metal halide
family: 83 lm/W with the 600W metal halide ?Growth Spectre? from GIB Lighting.

The metal halide lamp which can boast: 600W power input generates a luminous flux of up to 50,000 lumens! The colour spectrum of this metal halide lamp is perfectly suited for cuttings and seedlings. During the first weeks of the vegetative stage, the increased blue proportion ensures compact plant growth.

The energy saving lamp from Elektrox with a light colour spectrum ideal for the plant growth phase is a good addition to any grow room. Whether it?s to be used as the main light source for smaller setups or as energy-efficient lighting for separate zones for cuttings or mother plants.

This special, energy-saving plant lighting with a light colour spectrum suitable for the flowering or fruit formation phase offers high performance with low power consumption.

The small wing reflector by Adjust-A-Wings, in efficient titanium white has it all! Perfect for all those who wish to get the maximum flexible light output in a small space. The reflector, like all Adjust-A-Wings models, is made from light, rust-free aluminium and is coated with a resistant, easy-to-clean polymer sheeting. This sheeting is extremely resistant to heat and distributes the light more evenly than any other Adjust-A-Wing reflector. This reflector reaches slightly lower light reflection values than the Avenger models, for example, but this effect is negligible thanks to the particularly even light distribution.

The SANlight FLEX series is a compact and powerful LED illumination solution for use in multi-layer systems, Interlighting applications and as an additional light to existing luminaires.

• to mount the driver away from the light bar
• 3-core

If you want to mount the driver of your Lumatek LED lamp outside of the grow tent, you will need this cable to connect it to the LED light bar.

The unbeatable lamp from the Philips range. 600W of pure efficiency makes this HPS lamp a good investment. Green-Power lamps are perfect for assimilation lighting. This means that they support the CO2 absorption (=assimilation) for improved photosynthesis, which leads to faster-growing, overall healthier plants.

• High light output
• Suitable for the growth and flowering phases
• Optimised light spectrum

The SON-T Agro HPS 400W high-pressure sodium lamp from Philips is a lamp which can be used for both the growth and flowering phases.

This special, energy-saving plant lighting with a light colour spectrum suitable for the flowering or fruit formation phase offers high performance with low power consumption.

Lumatek too makes use of the red light colour spectrum for its HPS flowering grow lights. With a colour temperature of 2112K, the 600W version can give off an astonishing 85,000 lumens. The PAR value (photosynthetically active radiation) indicates the spectral range of sunlight used by living organisms to perform photosynthesis. Tables and diagrams provide better explanations for this.

• Unmatched light output
• Red-optimised light spectrum
• Perfect stimulation of flowering and fruiting
• 100 % Made in Germany

The GIB Lighting Pure Bloom Spectrum XTreme Output 600W is a sodium vapour lamp (NDL) developed and produced 100% in Germany especially for the final flowering phase of plant development. This discharge lamp has been consistently developed over time and delivers an unsurpassed light yield with 92,000 lumens and a PAR value of 1200 µmol/s PAR. The Pure Bloom Spectrum XTreme Output 600W is specifically optimised in the spectral range red and is therefore exclusively suitable for promoting flowering and fruiting. This lamp has an absolutely high-quality finish, is extremely bright and enables significantly better yields in terms of quality and quantity.

A cost-effective alternative. The HPS lamp by GIB Lighting.
The 600 W Flower Spectre "XtremeOutput" - an efficient model.

The 600 W lamp by GIB is particularly popular among beginners and hobby gardeners thanks to its value for money. The phrase "XtremeOutput" refers to the high efficiency value for a 600 W lamp. This value indicates how much of the power consumed (W) by a lamp is actually converted into useful light (lm). The GIB Flower Spectre "XtremeOutput" has an astonishing efficiency value of 150 lm/W, which is comparable with that of the big name brands.

• powerful light source for the final flowering
• optimised light spectrum
• perfect stimulation of flowering and fruiting
• 100% Made in Germany

The GIB Lighting Pure Bloom Spectrum XTreme Output 250W is a 100% German designed and manufactured sodium vapour lamp (NDL) specifically for the final flowering stage of plant development. This discharge lamp has been consistently developed over time and delivers a very convincing light yield with 32,000 lumens and a PAR value of 430µmol/s PAR. The Pure Bloom Spectrum XTreme Output 250W is specifically optimised in the spectral range red and is therefore exclusively suitable for promoting flowering and fruiting. This lamp has an absolutely high-quality finish, is extremely bright and enables perceptibly better yields in terms of quality and quantity.

This affordable 600W lamp is perfectly suited for ambitious hobby gardeners who value high yields or particularly lavish growth. Perfect for operation in XL grow tents or as grow lighting for mid-sized grow rooms.

The brand name lamp specially designed for assimilation lighting:
The Plantastar series by Osram. 600W for energy-hungry professional gardeners.

A first-class, high-performance 600W HPS lamp: With the Plantastar series, Osram has developed the ideal HPS solution especially for use in indoor grow areas. This HPS lamp is also in the red area of the spectrum (around 2000°K) and is therefore perfectly suited for the flowering phase. Unlike conventional HPS lamps, the Plantastar lamps have a somewhat broader light spectrum, which leads to shorter production times, healthier plants, and improved CO2 assimilation (30-40% higher blue proportion compared to the Vialox series).

Lumatek too makes use of the blue light colour spectrum for its metal halide growth-spectrum grow lights. With a colour temperature of 4323K, the 600W version can give off an astonishing 60,000 lumens. The PAR value (photosynthetically active radiation) indicates the spectral range of sunlight used by living organisms to perform photosynthesis. Tables and diagrams provide better explanations for this.

Light is a crucial requirement for photosynthesis, and therefore also for the growth of any plant. Plants thrive best in sunlight, as this provides a balanced light spectrum. However, plants can?t always be grown outside. In most cases, conventional indoor lighting is not sufficient to ensure good photosynthesis performance.

No life without light - that applies to both flora and fauna. The sun is the best source of light: It has a balanced light spectrum and therefore creates the optimal conditions for photosynthesis and plant growth.

The popular 600W brand-name lamp sets itself apart with exceptional reliability, a high luminous flux output (up to 150 lm/W) and first-class production quality. The patented shock absorber ensures reliable ignition and preservative operation of the high-pressure discharge lamp, and the new technology also reduces gas loss in the electrode feed-through. This allows for a long life without any substantial loss of light output.

Lumatek too makes use of the red light colour spectrum for its HPS flowering grow lights. With a colour temperature of 2087K, the 400W version can give off an astonishing 53,000 lumens. The PAR value (photosynthetically active radiation) indicates the spectral range of sunlight used by living organisms to perform photosynthesis. Tables and diagrams provide better explanations for this.

• powerful light source for the final flowering
• optimised light spectrum
• perfect stimulation of flowering and fruiting
• 100% Made in Germany

The GIB Lighting Pure Bloom Spectrum XTreme Output 250W is a 100% German designed and manufactured sodium vapour lamp (NDL) specifically for the final flowering stage of plant development. This discharge lamp has been consistently developed over time and delivers a very convincing light output with 32,000 lumens and a PAR value of 430µmol/s PAR. The Pure Bloom Spectrum XTreme Output 250W is specially optimised in the spectral range red and is therefore exclusively suitable for promoting flowering and fruiting. This lamp has an absolutely high-quality finish, is extremely bright and enables noticeably better yields in terms of quality and quantity.

Green-Power lamps are perfect for assimilation lighting. This means that they support the CO₂ absorption (=assimilation) for improved photosynthesis, which leads to faster-growing, overall healthier plants.

Light is a crucial requirement for photosynthesis, and therefore also for the growth of any plant. Plants thrive best in sunlight, as this provides a balanced light spectrum. However, plants can?t always be grown outside. In most cases, conventional indoor lighting is not sufficient to ensure good photosynthesis performance.

Lumatek too makes use of the blue light colour spectrum for its metal halide growth-spectrum grow lights. With a colour temperature of 4328K, the 400W version can give off an astonishing 44,000 lumens. The PAR value (photosynthetically active radiation) indicates the spectral range of sunlight used by living organisms to perform photosynthesis. Tables and diagrams provide better explanations for this.

Green Power lamps are ideal for assimilation lighting. This means that they promote CO2 uptake (=assimilation) for better photosynthesis, which leads to faster-growing, altogether more vital plants.

• High red / yellow component for the flowering phase
• Light colour warm white (WW)
• Highest light output
• 100% Made in Germany

The GIB Flower Spectrum XTreme Output 250W is a sodium vapour lamp (NDL) developed and produced 100% in Germany, which meets the highest demands in performance and quality. Due to its high red/yellow content in the light spectrum, the Flower Spectrum XTreme Output is particularly suitable for stimulation of flowering and fruiting. In crops with a shorter growth phase, the GIB Flower Spectrum can be used just as well in both phases due to its blue component.

The efficient option from the metal halide
family: 80 lm/W with the 400W metal halide ?Growth Spectre? from GIB Lighting.

GIB also offers an affordable metal halide lamp in the 400W class. The colour spectrum of this metal halide lamp is perfectly suited for cuttings and seedlings. During the first weeks of the vegetative stage, the increased blue proportion ensures compact plant growth.

A cost-effective alternative. The HPS lamp by GIB Lighting.
The 400W Flower Spectre "XtremeOutput" - an efficient model.

The 400W lamp by GIB is particularly popular among beginners and hobby gardeners thanks to its value for money. The phrase "XtremeOutput" refers to the high efficiency value for a 400W lamp. This value indicates how much of the power consumed (W) by a lamp is actually converted into useful light (lm). The GIB Flower Spectre "XtremeOutput" has an astonishing efficiency value of 145lm/W, which is comparable with that of the big name brands.

Affordable, reliable, and powerful: A short description of these 600W HPS lights from Sylvania. Like all of the lamps in this series, what stands out is the price, but also excellent performance values.

Good value grow lighting in the 600W class: The Sylvania Grolux SHP-TS is geared specifically towards the needs of plant cultivation, and contrary to the SHP-TS version, it has a higher blue content in the light spectrum. As light with different wavelengths is needed for different metabolic processes in the plant, the broader spectrum of the Sylvania GroLux product line helps plants to achieve a more saturated green colour and lusher growth.

The quality 400W metal halide lamp by Philips. This lamp emits a stable white light with a high blue content, which makes it the perfect choice for the growth phase.

The quality 250W metal halide lamp by Philips. This lamp emits a stable white light with a high blue content, which makes it the perfect choice for the growth phase.

The Venture Sunmaster DUAL 400 W is an innovative HPS light with two colour spectrums. This combination lamp was developed specifically to meet the needs of serious indoor growers who wish to give their plants the right light frequency in all stages of the growth cycle with just one lamp.

The Elektrox Super Grow is a metal halide lamp with a blue-white light spectrum for the growth phase. At 5,600 Kelvin, it has a cool white colour temperature. With an output of 600 watts and a voltage of 110V, it helps you achieve stronger stems, large green leaves, and beautiful healthy plants. It has an E40 socket and can only be operated with a suitable ballast.

An E40 socket made of ceramic, to be used as an additional element for another light source or as a replacement for a defective socket. It fits all Adjust-A-Wings reflectors Medium and Large. In the large versions, it can be used as an additional light source.

The quality high pressure sodium lamp by Philips in "small".
Even though the 150 W model doesn't achieve the same level of efficiency as the more powerful models, it certainly has concrete benefits compared to others in its performance class. Its low power consumption is of interest to small-scale gardeners, who wish to reduce their consumption without having to do without HPS lighting.

• for Lumatek Zeus
• enables several lamps in series on the Digital Panel Plus

If you want to connect several Lumatek Zeus in series and connect them to the Digital Panel Plus, you need this cable.

• Dimmer for EVO 3, EVO4 and EVO 5
• Contactless dimming - no wear
• 100% waterproof

If you want to dim your lamp of the EVO series by SANlight, you need this magnetic dimmer. Thanks to its contactless function, there is no wear on sensitive potentiometers and corrosion due to water and humidity is no longer a danger with this dimmer. SANlight recommends dimmers especially for the extremely powerful EVO 5 models, but the use of a dimmer often makes sense even for the smaller models. In the vegetative phase, the plants do not need as much light as later during flowering, and for very young plants, too much light is even harmful. So this dimmer allows you to have gentle lighting at the beginning of your indoor grow, while still saving electricity, and a high light output towards the end for fat flowers and lush harvests.

The Sylvania Grolux SHP-TS is geared specifically towards the needs of plant cultivation, and contrary to the SHP-TS version, it has a higher blue content in the light spectrum. As light with different wavelengths is needed for different metabolic processes in the plant, the broader spectrum of the Sylvania GroLux product line helps plants to achieve a more saturated green colour and lusher growth.

No life without light - that applies to both flora and fauna. The sun is the best source of light: It has a balanced light spectrum and therefore creates the optimal conditions for photosynthesis and plant growth.

The brand name lamp specially designed for assimilation lighting:
The Plantastar series by Osram. 400W for efficient professional and home gardeners.

Unparalleled 400W assimilation lighting: With the Plantastar series, Osram has developed the ideal HPS solution especially for use in indoor grow areas. This HPS lamp is also in the red area of the spectrum (around 2000°K) and is therefore perfectly suited for the flowering phase. Unlike conventional HPS lamps, the Plantastar lamps have a somewhat broader light spectrum, which leads to shorter production times, healthier plants, and improved CO2 assimilation (30-40% higher blue proportion compared to the Vialox series).

The brand name lamp specially designed for assimilation lighting:
The Plantastar series by Osram. 250W for consumption-conscious gardeners.

Unbeaten in the 250W class: With the Plantastar series, Osram has developed the ideal HPS solution especially for use in indoor grow areas. This HPS lamp is also in the red area of the spectrum (around 2000°K) and is therefore perfectly suited for the flowering phase. Unlike conventional HPS lamps, the Plantastar lamps have a somewhat broader light spectrum, which leads to shorter production times, healthier plants, and improved CO2 assimilation (30-40% higher blue proportion compared to the Vialox series).

Want to install an air-cooled reflector into a 160mm system? These three parts make that possible. Solid, galvanised reducer and light, flexible aluminium ducting (opaque) from Ventilution.

Lumatek too makes use of the blue light colour spectrum for its metal halide growth-spectrum grow lights. With a colour temperature of 4534K, the 250W version can give off an astonishing 24,000 lumens. The PAR value (photosynthetically active radiation) indicates the spectral range of sunlight used by living organisms to perform photosynthesis. Tables and diagrams provide better explanations for this.

• Power connection for SANlight Grow LEDs
• For all models of the Q-Series Gen2
• Length 2.1 metres

Power cable for connecting the SANlight Q-Series Generation 2.

Suitable for the models:

...

• connects the lamp with a distribution block
• fits for Q-Series Gen2 and EVO lamps
• space-saving 90 ° angle

To connect several SANlight LEDs to a distribution block, you need the right extension cable. This cable is equipped with a 90 ° angle plug and thus saves a lot of space when installed.

This is a new addition to our grow shop. This text is a placeholder. You may already purchase the product.

This is a new addition to our grow shop. This text is a placeholder. You may already purchase the product.

If you're looking for quality in the area of low-energy HPS lamps (250W), yoüre guaranteed to be satisfied with the popular Osram band lamps!

Lumatek too makes use of the red light colour spectrum for its HPS flowering grow lights. With a colour temperature of 2066K, the 250W version can give off an astonishing 30,000 lumens. The PAR value (photosynthetically active radiation) indicates the spectral range of sunlight used by living organisms to perform photosynthesis. Tables and diagrams provide better explanations for this.

Extension cable for connecting LED grow lamps of the new Sanlight Q-Series Generation 2. The cable can be used to connect several LED modules of the Q-Series Gen2 in series (daisy-chaining).

In the 400W class as well, the high pressure sodium lights from Sylvania are the ideal choice when it?s a question of affordable but reliable and long-lasting lamps. Sylvania is a subsidiary of Osram and has certainly made a name for itself in the world of grow lights.

They set themselves apart with exceptional reliability, a high luminous flux output (up to 141 lm/W) and first-class production quality, in the 400W class too.

Elektrox Super Bloom is a 600-watt HPS light. The light output is 142 lumens/watt with a colour temperature of 2,000 Kelvin. Thanks to its red colour spectrum, the Elektrox Super Bloom is perfectly suited for the flowering phase, as the red content supports healthy growth and bigger yields. With an output of 600 watts, this HPS light can be used in grow tents with a floor space of up to 1.44 sqm.

The Elektrox Super Grow is a metal halide lamp with a blue-white light spectrum for the growth phase. At 5,600 Kelvin, it has a cool white colour temperature. With an output of 400 watts and a voltage of 120V, it helps you achieve stronger stems, large green leaves, and beautiful healthy plants. It has an E40 socket and can only be operated with a suitable ballast.

A quality HPS lamp with low consumption and good performance values.
The outstanding high-pressure sodium light from Philips.

• With angled appliance plug
• saves space during installation
• can be used for Q and EVO series

Especially with smaller grow boxes, it is often the case that a straight connection cable already touches the tent wall on the lamp side. The grow lamp may then not be able to be hung in the perfect position for homogeneous illumination. With the SANlight power cable with a 90° angle on the side of the unit, you save a lot of space and can avoid this problem. The angled power cable works for the new EVO series as well as for the lamps of the proven Q Gen2 series.

The high pressure sodium lights from Sylvania are the ideal choice when it?s a question of affordable but reliable and long-lasting lamps. Sylvania is a subsidiary of Osram and has certainly made a name for itself in the world of grow lights.

The Defender Super Spreader is simple, yet it is an incredibly effective tool. There is a common misconception that the Super Spreader blocks light. The Super Spreader does exactly the opposite - it creates a wider more even light spread, removing hot spots and cold corners. The Super Spreader lets the user place the light closer to the plant canopy in order to maximise the use of power. The Super Spreader reduces heat at plant level by at least 5oC. Not only that, this genius tool will increase your yield with less lights and let you grow right through summer!

The SANlight power adapter SGA60 supplies the SANlight Flex LEDs Flex 10 and Flex 20 with power.

Cost-effective lamp, which is particularly popular among beginners and hobby gardeners thanks to its low energy consumption. But also for those who change out their lamps often - just take a look at the price.

The quality high pressure sodium lamp by Philips in "small".
Even though the 250W model doesn?t achieve the same level of efficiency as the more powerful models, it certainly has concrete benefits compared to others in its performance class. Its low power consumption is of interest to small-scale gardeners, who wish to reduce their consumption without having to do without HPS lighting.

This quality, light, flexible ducting can be implemented for many different uses: Whether it?s extracting exhaust air from a grow tent, providing an air supply in a garden, or attaching an air cooled reflector system with a fan, this ducting makes anything possible!

The Venture Sunmaster DUAL 250 W is an innovative HPS light with two colour spectrums. This combination lamp was developed specifically to meet the needs of serious indoor growers who wish to give their plants the right light frequency in all stages of the growth cycle with just one lamp.

• H-distribution block for SANlight LEDs Gen2
• For connecting multiple LED modules
• Daisychaining

All new LED grow lamps of the SANlight Q-Series Generation 2 are daisychainable. In this way, multiple modules can be operated on just one power connection. With this H-distribution block, the lamps can be easily connected in series.(see sketch).

High-level automated time control.
The Omnirex from Legrand, precision from a leading manufacturer.

Mechanical analogue timer for advanced needs. Precision and reliability are particularly essential for light control. The Omnirex by Legrand meets these requirements. Precise mechanisms, quality materials and solid assembly make these timers a long-lasting accompaniment to your grow room setup.

Elektrox Super Bloom is a 400-watt HPS light. The light output is 136 lumens/watt with a colour temperature of 2,000 Kelvin. Thanks to its red colour spectrum, the Elektrox Super Bloom is perfectly suited for the flowering phase, as the red content supports healthy growth and bigger yields. With an output of 400 watts, this HPS light can be used in grow tents with a floor space of up to 1 sqm.

The Enforcer Super Spreader is simple, yet it is an incredibly effective tool. There is a common misconception that the Super Spreader blocks light. The Super Spreader does exactly the opposite - it creates a wider more even light spread, removing hot spots and cold corners. The Super Spreader lets the user place the light closer to the plant canopy in order to maximise the use of power. The Super Spreader reduces heat at plant level by at least 5oC. Not only that, this genius tool will increase your yield with less lights and let you grow right through summer!

The Enforcer Super Spreader is simple, yet it is an incredibly effective tool. There is a common misconception that the Super Spreader blocks light. The Super Spreader does exactly the opposite - it creates a wider more even light spread, removing hot spots and cold corners. The Super Spreader lets the user place the light closer to the plant canopy in order to maximise the use of power. The Super Spreader reduces heat at plant level by at least 5oC. Not only that, this genius tool will increase your yield with less lights and let you grow right through summer!

• can be loaded up to 16 amps
• 20 switching times per day possible
• with NiMh battery
• large display

With the digital timer from Lumatek, you can control sodium vapour lamps, MH lamps or fans. You have 20 on/off switching points available per day (140 per week). You can choose switching times between one minute and seven days. The LCD display is easy to read and has a 24-hour display.

The SANlight power adapter GST25 supplies the SANlight Flex LEDs Flex 10 and Flex 20 with power.

Extension cable for connecting LED grow lamps of the new Sanlight Q-Series Generation 2. The cable can be used to connect several LED modules of the Q-Series Gen2 in series (daisy-chaining).

The Adjust-A-Wings spare parts kit for reflectors in the size Medium consists of two tension wires and two suspensions as well as the matching screws. 

Simple euro reflector with e40 bulb holder and luster terminal.

Elektrox Super Bloom is a 150-watt HPS light. The light output is 16,500 lumens with a colour temperature of 2,000 Kelvin. Thanks to its red colour spectrum, the Elektrox Super Bloom is perfectly suited for the flowering phase, as the red content supports healthy growth and bigger yields. With an output of 250 watts, this HPS light can be used in grow tents with a floor space of up to 0.36 sqm.

The Adjust-A-Wings spare parts kit for reflectors in size Large consists of two tension wires and two suspensions as well as the matching screws.

The Defender Super Spreader is simple, yet it is an incredibly effective tool. There is a common misconception that the Super Spreader blocks light. The Super Spreader does exactly the opposite - it creates a wider more even light spread, removing hot spots and cold corners. The Super Spreader lets the user place the light closer to the plant canopy in order to maximise the use of power. The Super Spreader reduces heat at plant level by at least 5oC. Not only that, this genius tool will increase your yield with less lights and let you grow right through summer!

So that everything more or less runs itself:
The timer for mechanical device control.

This analogue timer is a cost-effective solution for automatically switching small devices on and off, such as extractor fans or ventilators.

This flexible, moisture resistant cable is well suited for connecting devices that do not require a ballast (e.g. CFL lighting, extractor fans, etc.) to a power source.

Protective cover for the multiple plug for Q series Gen2. If no LED module is connected to the multi-plug, this cover protects against contamination in the grow box.