• for installation in round ventilation ducts
• prevents air backflow
• Foam seal reduces operating noise
• Diameter: 100 mm

With this back draft shutter you ensure that there is no (unwanted) backflow of air in your Grow Box ventilation system. The split flap closure ensures that the air can only flow in one direction. The shutters of this component made of sheet steel press against a foam seal when closed. This prevents possible temperature loss in the grow box and reduces operating noise in the pipe system. A spring wheel in the flap closure ensures that this back draft shutter can also be installed in vertical constructions. The back draft shutter is made of galvanised sheet steel and is very solid and durable.

• for installation in round ventilation ducts
• prevents air backflow
• Foam seal reduces operating noise
• Diameter: 125 mm

With this back draft shutter you ensure that there is no (unwanted) backflow of air in your Grow Box ventilation system. The split flap closure ensures that the air can only flow in one direction. The shutters of this component made of sheet steel press against a foam seal when closed. This prevents possible temperature loss in the grow box and reduces operating noise in the pipe system. A spring wheel in the flap closure ensures that this back draft shutter can also be installed in vertical constructions. The back draft shutter is made of galvanised sheet steel and is very solid and durable.

• for installation in round ventilation ducts
• prevents air backflow
• Foam seal reduces operating noise
• Diameter: 150 mm

With this back draft shutter you ensure that there is no (unwanted) backflow of air in your Grow Box ventilation system. The split flap closure ensures that the air can only flow in one direction. The shutters of this component made of sheet steel press against a foam seal when closed. This prevents possible temperature loss in the grow box and reduces operating noise in the pipe system. A spring wheel in the flap closure ensures that this back draft shutter can also be installed in vertical constructions. The back draft shutter is made of galvanized sheet steel and is very solid and durable.

• for installation in round ventilation ducts
• prevents air backflow
• Foam seal reduces operating noise
• Diameter: 160 mm

With this back draft shutter you ensure that there is no (unwanted) backflow of air in your Grow Box ventilation system. The split flap closure ensures that the air can only flow in one direction. The shutters of this component made of sheet steel press against a foam seal when closed. This prevents possible temperature loss in the grow box and reduces operating noise in the pipe system. A spring wheel in the flap closure ensures that this back draft shutter can also be installed in vertical constructions. The back draft shutter is made of galvanised sheet steel and is very solid and durable.

• for installation in round ventilation ducts
• prevents air backflow
• Foam seal reduces operating noise
• Diameter: 200 mm

With this back draft shutter you ensure that there is no (unwanted) backflow of air in your Grow Box ventilation system. The split flap closure ensures that the air can only flow in one direction. The shutters of this component made of sheet steel press against a foam seal when closed. This prevents possible temperature loss in the grow box and reduces operating noise in the pipe system. A spring wheel in the flap closure ensures that this back draft shutter can also be installed in vertical constructions. The back draft shutter is made of galvanised sheet steel and is very solid and durable.

• for installation in round ventilation ducts
• prevents air backflow
• Foam seal reduces operating noise
• Diameter: 250 mm

With this back draft shutter you ensure that there is no (unwanted) backflow of air in your Grow Box ventilation system. The split flap closure ensures that the air can only flow in one direction. The shutters of this component made of sheet steel press against a foam seal when closed. This prevents possible temperature loss in the grow box and reduces operating noise in the pipe system. A spring wheel in the flap closure ensures that this back draft shutter can also be installed in vertical constructions. The back draft shutter is made of galvanised sheet steel and is very solid and durable.

• for installation in round ventilation ducts
• prevents air backflow
• Foam seal reduces operating noise
• Diameter: 315 mm

With this back draft shutter you ensure that there is no (unwanted) backflow of air in your Grow Box ventilation system. The split flap closure ensures that the air can only flow in one direction. The shutters of this component made of sheet steel press against a foam seal when closed. This prevents possible temperature loss in the grow box and reduces operating noise in the pipe system. A spring wheel in the flap closure ensures that this back draft shutter can also be installed in vertical constructions. The back draft shutter is made of galvanised sheet steel and is very solid and durable.

• For use in the growroom exhaust ventilation
• very sturdy, made of galvanised sheet steel
• diameter 100 mm

This 90° bend is used to connect spiral ducts or flex hoses. It is made of galvanised sheet steel and is extremely sturdy for use in the grow box or grow room.

• For use in the growroom exhaust ventilation
• very sturdy, made of galvanised sheet steel
• Diameter 125 mm

This 90° bend is used to connect spiral ducts or flex hoses. It is made of galvanised sheet steel and is extremely sturdy for use in the grow box or grow room.

• For use in the growroom exhaust ventilation
• very sturdy, made of galvanised sheet steel
• Diameter 160 mm

This 90° bend is used to connect spiral ducts or flex hoses. It is made of galvanised sheet steel and is extremely sturdy for use in the grow box or grow room.

• For use in the growroom exhaust ventilation
• very sturdy, made of galvanised sheet steel
• diameter 200 mm

This 90° bend is used to connect spiral ducts or flex hoses. It is made of galvanised sheet steel and is extremely sturdy for use in the grow box or grow room.

• For use in the growroom exhaust ventilation
• very sturdy, made of galvanised sheet steel
• Diameter 250 mm

This 90° bend is used to connect spiral ducts or flex hoses. It is made of galvanised sheet steel and is extremely sturdy for use in the grow box or grow room.

• For use in the growroom exhaust ventilation
• very sturdy, made of galvanised sheet steel
• Diameter 315 mm

This 90° bend is used to connect spiral ducts or flex hoses. It is made of galvanised sheet steel and is extremely sturdy for use in the grow box or grow room.

Especially in indoor gardening, you always have to deal with different sized connections (of filters, pipes, hoses, Cooltubes, etc.). But with these practical reductions from CarbonActive, this is finally history - because they are particularly versatile.

Especially in indoor gardening, you always have to deal with different sized connections (of filters, pipes, hoses, Cooltubes, etc.). But with these practical reductions from CarbonActive, this is finally history - because they are particularly versatile.

Especially in indoor gardening, you always have to deal with different sized connections (of filters, pipes, hoses, Cooltubes, etc.). But with these practical reductions from CarbonActive, this is finally history - because they are particularly versatile.

Especially in indoor gardening, you always have to deal with different sized connections (of filters, pipes, hoses, Cooltubes, etc.). But with these practical reductions from CarbonActive, this is finally history - because they are particularly versatile.

• Moulded part for Growroom exhaust ventilation
• very stable, made of galvanised sheet steel
• For connecting hoses/pipes with the same diameter
• Diameter: 100 mm

This female ducting coupler made of galvanised sheet steel is needed if you want to connect plastic pipes or flex hoses with the same diameter. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room.

• Moulded part for Growroom exhaust ventilation
• very stable, made of galvanised sheet steel
• For connecting hoses/pipes with the same diameter
• Diameter: 125 mm

This female ducting coupler made of galvanised sheet steel is needed if you want to connect plastic pipes or flex hoses with the same diameter. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room.

• Moulded part for Growroom exhaust ventilation
• very stable, made of galvanised sheet steel
• For connecting hoses/pipes with the same diameter
• Diameter: 160 mm

This female ducting coupler made of galvanised sheet steel is needed if you want to connect plastic pipes or flex hoses with the same diameter. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room.

• Moulded part for Growroom exhaust ventilation
• very stable, made of galvanised sheet steel
• For connecting hoses/pipes with the same diameter
• Diameter: 200 mm

This female ducting coupler made of galvanised sheet steel is needed if you want to connect plastic pipes or flex hoses with the same diameter. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room.

• Moulded part for Growroom exhaust ventilation
• very stable, made of galvanised sheet steel
• For connecting hoses/pipes with the same diameter
• Diameter: 250 mm

This female ducting coupler made of galvanised sheet steel is needed if you want to connect plastic pipes or flex hoses with the same diameter. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room.

• Moulded part for Growroom exhaust ventilation
• very stable, made of galvanised sheet steel
• For connecting hoses/pipes with the same diameter
• Diameter: 315 mm

This female ducting coupler made of galvanised sheet steel is needed if you want to connect plastic pipes or flex hoses with the same diameter. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room.

Practical reducer for connecting ventilation equipment with diameters of 125 mm and 100 mm. With the use of an optional fast clamp, it can be connected directly to the fan or carbon filter, but it is also suitable for connecting various ventilation ducting with the appropriate diameters.

Practical reducer for connecting ventilation equipment with diameters of 160 mm and 100 mm. With the use of an optional fast clamp, it can be connected directly to the fan or carbon filter, but it is also suitable for connecting various ventilation ducting with the appropriate diameters.

Practical reducer for connecting ventilation equipment with diameters of 160 mm and 125 mm. With the use of an optional fast clamp, it can be connected directly to the fan or carbon filter, but it is also suitable for connecting various ventilation ducting with the appropriate diameters.

Practical reducer for connecting ventilation equipment with diameters of 200 mm and 125 mm. With the use of an optional fast clamp, it can be connected directly to the fan or carbon filter, but it is also suitable for connecting various ventilation ducting with the appropriate diameters.

Practical reducer for connecting ventilation equipment with diameters of 200 mm and 160 mm. With the use of an optional fast clamp, it can be connected directly to the fan or carbon filter, but it is also suitable for connecting various ventilation ducting with the appropriate diameters.

Practical reducer for connecting ventilation equipment with diameters of 250 mm and 125 mm. With the use of an optional fast clamp, it can be connected directly to the fan or carbon filter, but it is also suitable for connecting various ventilation ducting with the appropriate diameters.

Practical reducer for connecting ventilation equipment with diameters of 250 mm and 160 mm. With the use of an optional fast clamp, it can be connected directly to the fan or carbon filter, but it is also suitable for connecting various ventilation ducting with the appropriate diameters.

Practical reducer for connecting ventilation equipment with diameters of 250 mm and 200 mm. With the use of an optional fast clamp, it can be connected directly to the fan or carbon filter, but it is also suitable for connecting various ventilation ducting with the appropriate diameters.

Practical reducer for connecting ventilation equipment with diameters of 315 mm and 160 mm. With the use of an optional fast clamp, it can be connected directly to the fan or carbon filter, but it is also suitable for connecting various ventilation ducting with the appropriate diameters.

Practical reducer for connecting ventilation equipment with diameters of 315 mm and 200 mm. With the use of an optional fast clamp, it can be connected directly to the fan or carbon filter, but it is also suitable for connecting various ventilation ducting with the appropriate diameters.

Practical reducer for connecting ventilation equipment with diameters of 315 mm and 250 mm. With the use of an optional fast clamp, it can be connected directly to the fan or carbon filter, but it is also suitable for connecting various ventilation ducting with the appropriate diameters.

Practical reducer for connecting ventilation equipment with diameters of 150 mm and 125 mm Can be connected directly to fans or AKF by means of an optional connecting sleeve, but is also suitable for connecting various ventilation hoses with corresponding diameters.

• Ventilation moulding for Growroom ventilation systems
• made of galvanised sheet steel
• For connecting pipes and hoses
• Diameter: 100 mm

T-shaped moulded part for use in your supply and exhaust air system. With the T-piece, you can bring plastic pipes or flexible hoses together precisely. It is also suitable for connection to PVC pipes. The T-piece is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room.

• Ventilation moulding for Growroom ventilation systems
• made of galvanised sheet steel
• For connecting pipes and hoses
• Diameter: 125 mm

T-shaped moulded part for use in your supply and exhaust air system. With the T-piece, you can bring plastic pipes or flexible hoses together precisely. It is also suitable for connection to PVC pipes. The T-piece is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room.

• Ventilation moulding for Growroom ventilation systems
• made of galvanised sheet steel
• For connecting pipes and hoses
• Diameter: 160 mm

T-shaped moulded part for use in your supply and exhaust air system. With the T-piece, you can bring plastic pipes or flexible hoses together precisely. It is also suitable for connection to PVC pipes. The T-piece is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room.

• Ventilation moulding for Growroom ventilation systems
• made of galvanised sheet steel
• For connecting pipes and hoses
• Diameter: 200 mm

T-shaped moulded part for use in your supply and exhaust air system. With the T-piece, you can bring plastic pipes or flexible hoses together precisely. It is also suitable for connection to PVC pipes. The T-piece is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room.

• Ventilation moulding for Growroom ventilation systems
• made of galvanised sheet steel
• For connecting pipes and hoses
• Diameter: 250 mm

T-shaped moulded part for use in your supply and exhaust air system. With the T-piece, you can bring plastic pipes or flexible hoses together precisely. It is also suitable for connection to PVC pipes. The T-piece is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room.

• Ventilation moulding for Growroom ventilation systems
• made of galvanised sheet steel
• For connecting pipes and hoses
• Diameter: 315 mm

T-shaped moulded part for use in your supply and exhaust air system. With the T-piece, you can bring plastic pipes or flexible hoses together precisely. It is also suitable for connection to PVC pipes. The T-piece is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room.

A reducer for all occasions: Simply saw off the universal reducer at the appropriate place, and you can connect all kinds of tubes with diameters of 80, 100, 125, and 150 mm with one another.

• connect the exhaust air duct to the outside wall
• stable, galvanized sheet steel
• diameter 100 mm

A wall flange is the simplest and best solution to connect your exhaust system to an opening in the house wall. The tight connection between flange and exhaust hose prevents exhaust air from escaping into the interior. While a hose that is simply plugged into the wall can easily come loose due to vibration and air flow, it remains securely attached by the wall flange.

• connect the exhaust air duct to the outside wall
• stable, galvanized sheet steel
• diameter 125 mm

A wall flange is the simplest and best solution to connect your exhaust system to an opening in the house wall. The tight connection between flange and exhaust hose prevents exhaust air from escaping into the interior. While a hose that is simply plugged into the wall can easily come loose due to vibration and air flow, it remains securely attached by the wall flange.

• connect the exhaust air duct to the outside wall
• stable, galvanized sheet steel
• diameter 150 mm

A wall flange is the simplest and best solution to connect your exhaust system to an opening in the house wall. The tight connection between flange and exhaust hose prevents exhaust air from escaping into the interior. While a hose that is simply plugged into the wall can easily come loose due to vibration and air flow, it remains securely attached by the wall flange.

• connect the exhaust air duct to the outside wall
• stable, galvanized sheet steel
• diameter 160 mm

A wall flange is the simplest and best solution to connect your exhaust system to an opening in the house wall. The tight connection between flange and exhaust hose prevents exhaust air from escaping into the interior. While a hose that is simply plugged into the wall can easily come loose due to vibration and air flow, it remains securely attached by the wall flange.

• connect the exhaust air duct to the outside wall
• stable, galvanized sheet steel
• diameter 200 mm

A wall flange is the simplest and best solution to connect your exhaust system to an opening in the house wall. The tight connection between flange and exhaust hose prevents exhaust air from escaping into the interior. While a hose that is simply plugged into the wall can easily come loose due to vibration and air flow, it remains securely attached by the wall flange.

• connect the exhaust air duct to the outside wall
• stable, galvanized sheet steel
• diameter 250 mm

A wall flange is the simplest and best solution to connect your exhaust system to an opening in the house wall. The tight connection between flange and exhaust hose prevents exhaust air from escaping into the interior. While a hose that is simply plugged into the wall can easily come loose due to vibration and air flow, it remains securely attached by the wall flange.

• connect the exhaust air duct to the outside wall
• stable, galvanized sheet steel
• diameter 315 mm

A wall flange is the simplest and best solution to connect your exhaust system to an opening in the house wall. The tight connection between flange and exhaust hose prevents exhaust air from escaping into the interior. While a hose that is simply plugged into the wall can easily come loose due to vibration and air flow, it remains securely attached by the wall flange.

• connect the exhaust air duct to the outside wall
• stable, galvanized sheet steel
• diameter 400 mm

A wall flange is the simplest and best solution to connect your exhaust system to an opening in the house wall. The tight connection between flange and exhaust hose prevents exhaust air from escaping into the interior. While a hose that is simply plugged into the wall can easily come loose due to vibration and air flow, it remains securely attached by the wall flange.

• for the growroom exhaust ventilation
• made of galvanised sheet steel
• Improved air passage
• diameter 100 mm

With this Y-piece you can perfectly join plastic pipes or flexible hoses. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room. The Y-shaped design ensures improved exhaust ventilation compared to T-pieces.

• for the growroom exhaust ventilation
• made of galvanised sheet steel
• Improved air passage
• diameter 125 mm

With this Y-piece you can perfectly join plastic pipes or flexible hoses. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room. The Y-shaped design ensures improved exhaust ventilation compared to T-pieces.

• for the growroom exhaust ventilation
• made of galvanised sheet steel
• Improved air passage
• diameter 150 mm

With this Y-piece you can perfectly join plastic pipes or flexible hoses. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room. The Y-shaped design ensures improved exhaust ventilation compared to T-pieces.

• for the growroom exhaust ventilation
• made of galvanised sheet steel
• improved air passage
• diameter 160 mm

With this Y-piece you can perfectly join plastic pipes or flexible hoses. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room. The Y-shaped design ensures improved exhaust ventilation compared to T-pieces.

• for the growroom exhaust ventilation
• made of galvanised sheet steel
• Improved air passage
• diameter 200 mm

With this Y-piece you can perfectly join plastic pipes or flexible hoses. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room. The Y-shaped design ensures improved exhaust ventilation compared to T-pieces.

• for the growroom exhaust ventilation
• made of galvanised sheet steel
• Improved air passage
• diameter 250 mm

With this Y-piece you can perfectly join plastic pipes or flexible hoses. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room. The Y-shaped design ensures improved exhaust ventilation compared to T-pieces.

• for the growroom exhaust ventilation
• made of galvanised sheet steel
• Improved air passage
• Diameter 315 mm

With this Y-piece you can perfectly join plastic pipes or flexible hoses. It is made of galvanised sheet steel and is extremely stable for use in the grow box or grow room. The Y-shaped design ensures improved exhaust ventilation compared to T-pieces.